thermal analysis

Acorn Product Development is a product development consulting firm offering comprehensive design and engineering services, guiding businesses from initial concept to final implementation. With 30 years of experience, its integrated engineering and design team serves industries including robotics, consumer, life science, medical, industrial equipment, data center equipment, and food and beverage.

Brand IdentityCFD analysisdesign for manufacturabilitydesign validation testingelectrical engineeringembedded systems & firmware developmentfinite element analysisIndustrial Designkinematic analysismanufacturing transferMechanical EngineeringMold Flow analysisProduct Engineeringproduction supportprototypingStructural analysistolerance analysisUser experience designuser interface design

Advanced Aerial Applications LLC provides UAS-based aerial inspections, mapping, and modeling using AI-navigated drone technology capable of 64 megapixel imagery and up to 1.0 mm resolution. The company has over 25 years of geospatial experience including GIS, cartography, imagery, and LiDAR, and holds FAA commercial pilot licenses for UAS and airplanes.

3-D modelingaerial mappingcartographyDigital Elevation ModelsGISLiDARphotogrammetrypoint cloud generationUAS aerial inspectionsvolumetric calculations

Advanced Processing Technology™ (AvPro™) has innovated composite process control and measurement technologies for more than 25 years, helping manufacturing companies such as Boeing, General Atomics and Spirit Aerosystems measure and control structural composites manufacturing. Founded in the 1980s by engineer Tom Rose, AvPro develops measurement tools, sensors and control software for the composites cure process.

calibrationcomposite process controlcontrol system softwareDifferential Scanning Calorimetry (DSC)in-situ measurementsensor developmenttrainingviscoelastic testing

Advatech Pacific is an engineering services company specializing in trusted solutions for the aerospace and defense industries. Founded in 1995 by Jay P. Ebersohl, it provides engineering analysis, mechanical design, and manufacturing support. The company is ISO 9001:2015 and AS9100:2016 certified by NQA and ITAR registered, and all employees are US citizens.

CAD conversionsconceptual designdesign for additive manufacturingdesign for manufacturabilitydetailed designengineering analysisGD&T (ASME Y14.5) Drafting and CheckingManufacturing SupportMechanical Designquality controlReverse EngineeringSix Sigma / LeanSolid Modeling/ParametricsStructural & Dynamic analysisTolerance Analysis - StackingTool/Fixture Design

Aerospace Structural Research Corp (ASR) is a multidisciplinary engineering firm founded in 1995 by aircraft turbine engineers. ASR provides aerospace, mechanical, and structural engineering design and analysis services, including FEA, CFD, and 3D CAD, helping clients solve complex challenges across industrial, electromechanical, aerospace, mechanical, and structural systems.

3D CADAssembly ModelingComposite Part DesignComputational Fluid Dynamics (CFD)design for manufacturability (DFM)Dynamic & Vibration AnalysisFatigue & Fracture Toughness AnalysisFinite Element Analysis (FEA)microfluidicsMultiphysics AnalysisOpto-Mechanical AnalysisProduct Testing & Validationrapid prototypingsolid modelingStructural analysis

AKTS SA (Advanced Kinetics and Technology Solutions) is based in Sierre, Valais, Switzerland. It is dedicated to bringing together solid state kinetic analysis, thermogravimetry (TG), differential thermal analysis (DTA), differential scanning calorimetry (DSC), thermomechanical analysis (TMA), evolved gas analysis (EGA, MS, FTIR) and thermal stability of materials. AKTS develops software for kinetic analysis and thermal stability prediction and provides kinetic analysis services to customers worldwide.

kinetic analysislive online screen-sharing supportonline monitoring of shelf lifesimulation of material transformationsthermal stability prediction

Apollo Engineering Design Group is a team of engineers, critical thinkers, creative analysts, and machine-design professionals specializing in outside-the-box solutions to complex problems. They design, engineer, build, install, and commission automated machines for industrial environments and the entertainment industry, and contract services for structural, thermal, and vibration analysis. Their team includes professional engineers, mechanical/controls engineers, technicians, and installation professionals.

ANSYS Workbench analysisassemblyautomation and robotics designcommissioningengineering reviewfabricationfinite element analysisinstallationmachine designprototypingSolidWorks modelingStructural analysistooling and fixture designvibration analysis

Applied Engineering Services, Inc. (AES) was started in 1992 to provide engineering, analyses, design, inspection and technical services. AES specializes in the design of one-of-a-kind custom systems, facilities, buildings and equipment, including ground-based rocket engine test stands, nuclear/radiological environment equipment, process systems, and pressure vessels. The company reports over 30 years of service with a perfect safety record.

3D modelingCFD modelingfinite element analysisfoundation designgrading and drainage designHVAC designlaser tracking and scanningLiDAR scanningpiping system designPLC/SCADA designpressure vessel designseismic analysisStructural analysisvessel inspection and re-certification

Astro Chemical formulates and manufactures specialty epoxy and related chemistries for use as coatings, adhesives, saturants, and encapsulants. Founded in 1959, the company leverages over 60 years of experience and more than 1,000 formulations to serve industrial manufacturing and service markets including power generation, energy storage and transmission, electric motors and electronics, composites, aerospace, and defense.

analytical testingcustom qualification testingelectrical analysisenvironmental analysisformulationmanufacturingMechanical analysispackagingproduct developmentprototyping

ATGI (Advanced Technologies Group) is an aerospace research and development company located in Stuart, Florida, developing disruptive technologies for the defense and commercial marketplace. It designs and manufactures Hi-power Ram Air Turbines (HiRAT), HALO non-contacting dynamic seals, airborne pod systems for EW and ISR applications, and optical sensors. ATGI holds 14 patents issued in the United States and abroad and offers outsourced engineering and analysis services.

aero design and analysisanalysis and modelingapplied researchComputational Fluid Dynamics analysisenvironmental qualificationheat transferhigh speed data acquisitionlaboratory and field testinglinear and non-linear stress analysismanufacturingoptical designoptical ray tracing analysisprecision mechanical designprototype developmentsoftware and data system developmentSoftware Designtest facility designwind tunnel test

Avenue Technologies and Commodities Inc. (AVTC) is a professional, technical and engineering support services company headquartered in Ponca City, Oklahoma with satellite offices throughout the country. AVTC provides Information Technology, Engineering, Program/Project Management and Professional support services to government and commercial customers worldwide. It is a women-owned small business founded by Dr. Howard Whetzel, a retired Army Officer.

aerospace engineeringCYBER SECURITYElectrical Drafting and Engineeringengineering designHardware Development and IntegrationIntegration Test and AnalysisIT help desk supportmanufacturing engineeringMechanical Drafting and Engineeringnetwork engineeringProcess and Logistics Engineeringproject engineeringpropulsion engineeringReliability/Safety/MaintainabilityRF and Communication EngineeringRobotics and Autonomous SystemsStress/Structural/Vibration Analysissystem administrationsystems and software engineering

Bitconcepts LLC is an Engineering Consulting company since 1988, providing technical solutions to problems in design, manufacturing, and processes. It specializes in Product Design and Development (PDD) in Green Energy Harvesting and Energy Storage, Communications, Electronics, Avionics, Biomedical, optics, Aerospace, MEMS and Nano-technology, and commercial and military applications. The team serves innovative start-ups and established firms with design solutions, simulation, thermal, Power Electronics, Rotor Dynamics, and Electro-Mechanical analysis.

Electro-Mechanical analysisfeasibility studypower electronicsproduct design and developmentRotor Dynamicssimulation

BITRI Technology Solutions That Transform Lives We explore, create, and deliver: transforming needs-based research into practical solutions for national growth. We innovate with purpose: turning local resources into world-class technologies through collaboration and excellence. We build for tomorrow: addressing today’s challenges while shaping a sustainable, prosperous future. Who We Are The Botswana Institute for Technology Research and Innovation (BITRI) is a national research centre where ideas meet practical solutions. Established in 2012 under the Ministry of Communications and Innovation, we exist to turn research into real-world technologies that truly make a difference to the lives of Batswana. Our mission is to create home-grown, sustainable innovations that address national priorities, maximise the use of local resources, and deliver lasting impact. From concept to delivery.

3D prototypingabrasion resistance testingcompressive strength testingcustom software developmentelemental mappingEnvironmental impact assessmentsfailure analysismaterials testingmineral beneficiationSystem Integrationtensile strength testingtraining and capacity building

BroadTech Engineering is a Singapore-based engineering simulation consultancy and CAE software provider. It delivers Finite Element Analysis (FEA), Computational Fluid Dynamics (CFD), stress engineering, pipe stress analysis, vibration and acoustic consulting, and multiphysics simulation services to help clients make better engineering decisions. It serves industries including aerospace, automotive, marine, oil & gas, energy, electronics, and building & construction.

acoustic simulationCAD/CAE simulationComputational Fluid Dynamics (CFD)engineering simulation consultancyfatigue and fracture mechanicsFinite Element Analysis (FEA)multiphysics simulationpipe stress analysisstress analysisstructural optimizationvibration analysis

SciRisq provides consulting and software development related to hazard investigation and risk management. Founded by Keith Clutter, Ph.D. in 1998 (formerly Analytical & Computational Energetics), the company applies analytical and computational models to risk analysis, explosions, fluid mechanics, combustion, and shock-structure interaction. Clients include major corporations, private industry, and governmental agencies.

aerodynamicscombustioncomputational modelingexplosives analysisfluid mechanicsgas dispersionQRArisk analysissoftware developmentstructural damage analysis

Cambridge Polymer Group (CPG) provides contract research and analytical testing services in materials science, with decades of cross-industry experience. The company helps clients select materials, develop designs, optimize manufacturing processes, and mitigate regulatory risks, serving industries including healthcare, robotics, supply chain, and sustainability. Its GLP-compliant and ISO-accredited laboratory offers routine and custom testing in accordance with ASTM, ISO, USP, and other standards.

analytical testingbiocompatibility testingcustom synthesisdeformulationextractables and leachables testingfailure analysisGLP testingmaterial characterizationmechanical testingmethod development and validationregulatory testingrheological analysis

CANNON Instrument Company, founded in 1938 by Dr. Michael R. Cannon, produces viscosity-related test equipment and physical property standards. Located in Central Pennsylvania near Penn State University, the company offers automated viscometers, rheometers, constant temperature baths, thermal analysis and flash point testers, densitometers, and manual glass viscometers, along with service plans, training, and consulting.

calibrationdensity measurementDistillationflash point testingon-site trainingPreventive maintenancesample testing servicesviscosity testing

CKS Technologies, LLC is a Woman-Owned Small Business located in Huntsville, AL, founded in 2011 by CEO Cherry Sisk, PE to provide professional engineering services to government and industry. The company has multiple licensed Professional Engineers on staff and provides subject matter expertise in structural and thermal analyses, mechanical and electrical design, and systems engineering for customers including the US Army, US Navy, NASA and industry.

CADelectrical designfailure review and analysisfinite element analysisIndependent Verification and ValidationMechanical Designproject managementRequirements Managementsafety assessmentsStructural analysisSystems Engineeringtest and evaluationthermal stress analysis

CM Towers, Inc. is a specialty engineering, contracting and consulting firm focused on cooling tower projects, with over 46 years serving the New Jersey/New York City area and across the United States. It is a full-service cooling tower company performing emergency repairs, new construction, repair and maintenance, thermal upgrades, and custom design and engineering for industrial, power generation, petrochemical, pharmaceutical, government and commercial HVAC applications.

consultingcooling tower constructiondesignengineeringinstallationMaintenanceproject managementrepairstructural inspectionsthermal upgrades

Cobra Design & Engineering, Inc. is a Woman-Owned Small Business established June 20, 2000, specializing in mechanical engineering, printed circuit design, reverse engineering and turnkey fabrication and assembly for military and commercial industries. The team specializes in electronics packaging design balancing weight, thermal performance, structural integrity and manufacturability.

assemblyDesign for Manufacturing (DFM)dynamic analysiselectronics packagingEMI/RFI isolationflex circuit designgasketinginjection mold part designinjection mold tool designinjection mold tool manufacturingmachiningMechanical Designprinted circuit designrapid prototypingReverse EngineeringStructural analysisturnkey fabrication

DDA Engineering's mission since 2002 has been to apply multi-physics engineering simulation tools with partnered industry leaders to make the best products possible, saving cost and time and improving product performance understanding. For many clients, DDA Engineering has become their virtual engineering department for engineering design, development and analysis.

Acoustics analysisCAE implementationChemistry simulationDeformation analysisFatigue life analysisflow simulationLinear and non-linear vibration analysisMechanical analysismentoringMulti-Physics Simulationtraining

Composite Technology Development, Inc. (CTD) develops state-of-the-art composites for extreme conditions, harsh environments, and demanding applications. Founded in 1988, its solutions are used in high performance magnets and cryogenic systems (high energy physics, fusion, medical and industrial markets), aerospace, marine, automotive and industrial applications. CTD also provides services including composite material analysis and synthesis, cryogenic mechanical testing and thermo-mechanical design.

ASTM & SACMA testingcomposite material analysis and synthesiscryogenic mechanical testingcustom test developmentdielectric testingspecimen fabrication and bondingthermo-mechanical design

Comtel Electronics is a private company headquartered in Munich, Germany, founded in 1993, that designs and manufactures high performance backplanes and embedded systems for Telecom, Networking, Cable, Cloud, Storage, Military, Aerospace and Scientific markets. The Comtel Group has operations in Germany, USA, Israel and UK, and the company is an active member of the PICMG consortium.

Air-/-Plane PCB technologycircuit design and schematic capturecustom designdesign validationEMC filtering and RF shieldingenclosure designhigh-speed signal routingmanufacturingMechanical DesignPCB layoutproduct designscreening & testsignal integritysimulation

Convergent Manufacturing Technologies Inc. is located on the Point Grey peninsula of Vancouver, British Columbia, Canada. It provides software and hardware for advanced composites manufacturing, including simulation software and vacuum leak detection systems, along with engineering services, materials characterization, and training. Its customers include over two thirds of the top twenty aerospace companies worldwide.

cure cycle optimizationmaterials characterizationprocess simulationresidual stress and deformation analysistooling designtrainingvacuum leak detection