Mechanical Design

Abide Robotics builds Swivel, a small robot companion for older adults that provides company between visits, remembers their stories, offers reminders, and lets family call or message from a phone app. Available to families in the College Station, Texas area, with pilots for senior living communities. The company is based in Dallas, Texas.

caretaker dashboard developmentcloud infrastructureedge softwarememory systemon-device processingpart selectionrobot assemblyvoice-to-voice pipeline

Additive Innovations is an additive manufacturing (AM) technology development company with deep technical expertise in binder jetting. Established in 2022, it develops complete technical solutions from mechanical design and hardware engineering to software and application development, serving commercial and government customers. Located in Pittsburgh, Pennsylvania.

3d Printingapplication developmentbinder jettinghardware engineeringsoftware development

Adsys Controls provides solutions for precision control systems, advanced optical perception systems, high energy lasers, test system modeling & simulation, and unmanned aerial systems for military and commercial markets. Services include electronics design, embedded RT software, and image processing to high energy laser & optical perception systems for ISR&T, weapons, communication, and navigation.

adaptive opticselectronics designembedded RT softwareFEA thermal analysisguidance, navigation and controlImage Processinginertial stabilizationintegration, test & validationjitter controlline-of-sight stabilization & beam controlmodeling and simulationoptics design & modelingreal-time embedded softwaresignal processingSystem Engineeringturret control

Advanced Photon Sciences, LLC has an all star team of Engineers and Scientists with a vast resume of experiences and talent to translate your ideas into solutions. The company offers capabilities including high resolution direct write lithography, high power short burst laser systems, custom circuit design, and mechanical design.

100nm e-beam on 100mm substrates400nm on 200mm substrates (DLP Optical 385nm)advanced machined part capabilityASIC circuit designClewin and DW-2000 workshopcustom circuit designfield service and customer supportFusion, FEA, Solid modelinghigh power short burst laser systemshigh resolution direct write lithographymulti-layered PCB and surface mount technologieswafer probe testing

Advatech Pacific is an engineering services company specializing in trusted solutions for the aerospace and defense industries. Founded in 1995 by Jay P. Ebersohl, it provides engineering analysis, mechanical design, and manufacturing support. The company is ISO 9001:2015 and AS9100:2016 certified by NQA and ITAR registered, and all employees are US citizens.

CAD conversionsconceptual designdesign for additive manufacturingdesign for manufacturabilitydetailed designengineering analysisGD&T (ASME Y14.5) Drafting and CheckingManufacturing Supportquality controlReverse EngineeringSix Sigma / LeanSolid Modeling/ParametricsStructural & Dynamic analysisthermal analysisTolerance Analysis - StackingTool/Fixture Design

AeroMech Engineering Solutions provides aerospace engineering, mechanical design, CAD services, product development and government engineering support. Engineering solutions span from concept and CAD through prototype development, testing and production support. The company also offers MRO, aeronautical and generic aerospace engineering, and holds government contract codes for engineering services, CADD services, and research and development.

CADcomposite fabricationEngineering ServicesMROproduction supportprototype developmenttesting

AIM Concepts is a consulting company founded and run by Nathan Brown that provides engineering support services for the design, manufacturing, and testing of precision motion systems. With 20+ years of experience in the motion industry, the company offers services spanning concept development, stage design and manufacturing, custom system design, controller setup and support, specialty controller algorithms, testing, granite design, cable design and routing, and training.

Assembly Modelingcable designcable routingCAD modelingconcept developmentcontroller algorithmscontroller setup and supportcustom system designstage design and manufacturingtestingtolerancingtraining

AK Consulting Services, Inc. is a multi-discipline engineering and consulting firm with about 15 years of experience working with City Agencies, building owners, management companies and general contractors in the New York City Metro and Tri-State area. It provides architectural, engineering, inspection and expediting services, specializing in building code, zoning consultation, permits, special inspections, asbestos investigation and violation removal sign-off.

asbestos investigationcommissioningelectrical designenergy code complianceFeasibility studiesfire protection designplumbing designsite safety managementspecial inspectionsstructural designwelding inspection

Allied Technology is a custom automation integrator and robotics integrator based in Broomfield, Colorado, designing, developing, and manufacturing custom end-of-line packaging machinery for manufacturers across all industries. Since 1997, the company has built modular, scalable robotic packaging systems, from compact semi-automated cells to fully integrated robotic packaging lines, serving clients in all 50 states.

assemblycontract manufacturingControls Engineeringcustom machine designprecision fabricationrobotic programmingSystem Integration

Alto Precision is a specialized engineering and machining firm that partners with manufacturers to provide superior quality turnkey or single step solutions to their tooling, automation, production, or machine building needs. Based in Grand Rapids, Michigan since 1982, Alto Precision provides fabrication, precision machining, mechanical design, controls engineering, and robot integration. Leading provider of innovative, high-quality tooling and automation solutions.

assemblyCNC MachiningControls Engineeringcustom machine design and buildelectrical and controls engineeringelectrical wiringfabricationFixturesgrindinginspectionLaser fixturesmachiningmechanical design and engineeringmillingpanel buildingPanel building and electrical wiringprototype part machiningrobot integrationSAWWeld cellswelding

Amarel (אמרל) provides professional complementary services to manufacturing and technology industries in Israel and worldwide, operating across the product/project lifecycle. Founded in 2004, it employs over 1,000 engineers, technicians and experts and holds ISO 27001 and ISO 9001:2015 certifications. It is recognized as a supplier to the Israeli Ministry of Defense and as an essential enterprise in emergencies.

assembly documentationdigital interactive manuals (IETM)draftinge-learninghardware developmentMaintenance and Customer Serviceproduction managementsimulationssoftware and firmware developmentSystem EngineeringSystem Integrationtechnical writingtestingtraining developmentVR/AR

Amarel US is the North American arm of the Amarel Group, focused on knowledge management for industrial manufacturers. It helps manufacturers transform fragmented manuals, procedures, parts data, and training content into structured, secure, and actionable digital knowledge. Amarel US combines the Amarel Group's technology implementation experience with professional content services, platforms, and flexible deployment models (cloud, on-premise, or managed subscription).

3D animationautomated legacy-document conversioncatalog managementcontent transformationdigital interactive manualsengineering documentationintelligent content structuringinteractive simulationslearning managementmulti-channel publishingprocess controltechnical documentationtraining content developmentworkforce execution

AM Kreations designs, prototypes, tests and manufactures complex mechanical hardware and provides manufacturing process development for demanding applications. Based in Los Angeles, the company offers mechanical design, CAD, prototyping, machining, welding, fabrication, assembly, tooling, test hardware and validation, failure investigation, process development, and low-volume production. Founded by Aram Kurchian, whose experience spans aerospace, aviation, electrification, defense, motorsports and industrial equipment.

3d PrintingassemblyCADCNC Machiningdesign optimizationDFM Design Reviewfabricationfailure investigationfixture designManufacturing Troubleshootingprecision machiningprototypingroot cause analysistest fixturesTest HardwareTig weldingtoolingvalidation

Angus-Young is a full-service architectural, landscape architecture, engineering, and interior design firm founded in 1956. It describes itself as a general practice firm delivering integrated design solutions, construction documentation, bid management, and construction services, balancing beauty, functionality, and budget for clients.

3D-Visualizations/Renderingsarchitectural designbid managementconstruction documentationconstruction serviceselectrical designinterior designlandscape designmaster planningplumbing designpre-development planningSite/Civil Designstructural designSustainable/LEED Design

Aperture Optical Sciences designs and manufactures precision optics components and systems for space-based imaging and optical communications, high energy lasers, airborne imaging, and industrial machines and instruments. AOS is a US-owned corporation located in Central Connecticut, is ITAR registered, and is a leading US manufacturer of SiC optics with an installed base in more than 60 satellites.

Computer Controlled Polishingdiamond based shapingengineeringinterferometric testingMetrology Systemsoptical designrobotic optical fabricationrobotic polishingthin film coatings

Apex Procuring is a government procurement, subcontracting, and business development consulting firm serving federal, state, and local agencies. Founded by Art Pulphus, a U.S. Air Force veteran, it specializes in prime contracting, teaming, and subcontracting, and also provides facilities and building systems services, building maintenance, technical and engineering support, and procurement and logistics.

building automationcontract executioncost estimationElectrical Systemsfacility inspectionsfire protection systemsflooring installationHVAC installationHVAC maintenanceHVAC repairmarket researchPreventive maintenanceprime contractingprocurementSecurity SystemssourcingSubcontractingsupplier coordinationteaming

Äpre Instruments designs and manufactures surface and wavefront interferometers, including Fizeau and LUPI interferometers, for the precision optical manufacturing industry. The company also develops REVEAL metrology software and patented Spectrally Controlled Interferometry (SCI) technology, and offers custom systems, upgrades, refurbishments, and optical accessories. Founded June 19, 2013, with headquarters in Tucson, AZ.

CNC spot polishing reference opticscustom system design and manufacturinginterferometer refurbishment and upgradesinterferometryoptical designsoftware developmentsurface and wavefront measurement

Arpin Associates, LLC is a Broward County, Florida engineering and construction firm, expanding from Arpin & Sons, active in the construction industry for four generations. The company offers engineering, general contracting, inspections, design/build, and ADA handicap compliance and lawsuit representation services.

ADA compliancecivil designconcrete restorationdesign/buildelectrical designengineeringexpert witness testimonygeneral contractinginspectionsmetal building constructionshipping container constructionstructural design

ASR Engineering Inc. provides industrial control automation engineering solutions, including PLC, PAC, and HMI/SCADA development, turnkey robotic cells, UL-listed control panel fabrication, and mechanical design using SolidWorks. The company serves manufacturers, machine builders, and R&D operations across the USA, Canada, South America, and Europe in industries such as alternative energy, general manufacturing, food processing equipment, and R&D facilities.

commissioningHMI/SCADA developmentPAC programmingPLC programmingproject managementrobotic integrationrobotic programmingSolidWorks 3D modelingUL-listed control panel fabrication

ATA Engineering provides engineering services including design, analysis, and test. The company offers mechanical design, prototype development, independent design assessment, modal and GVT testing, static and dynamic strain qualification, free-play testing, test-analysis correlation, acoustics, operational flight, drop and shock analysis, aeroelasticity and flutter, AI and machine learning, composite structures, CFD and FSI, fatigue and fracture, hypersonics, kinematic and multibody dynamics, loads and dynamics, material characterization, multiphysics,

Acousticsaeroelasticity and flutterAI and machine learningCFD and FSIcomposite structuresdrop and shock analysisfatigue and fracturefree-play testinghypersonicsindependent design assessmentkinematic and multibody dynamicsmodal and GVT testingoperational flightprototype developmentstatic and dynamic strain qualificationtest-analysis correlation

How We’re Different Case Studies Alotech Partners Sustainability Remanufacturing Metal Washing Capabilities Manufacturing Subcontracting Capability Statement Content Contact Us Alotech Is Not Your Typical Contract Manufacturer Find Out Why Contact Us Remanufacturing Learn More Subcontracting Learn More Metal Washing Learn More Welcome to Alotech, Inc. Located in North Carolina, Alotech, Inc. works with US inventors, entrepreneurs and product marketeers to create unique, innovative processes and designs with a laser focus on the customer’s return on investment. We are the only contract manufacturer you will find that provides a full bundle of unique capabilities to take a product to market from business model development, prototyping, product machining, design, reverse engineering, and remanufacturing to product development, contract manufacturing, fulfillment and logistics. Our goal is.

Assembly and Sub-Assemblybalancingblasting and cleaningdismantling and sortinginspection, sorting, and packinglogisticsmachiningPLC controls & automationproduct machiningprototypingremanufacturingReverse Engineeringrework and dimensional correctionsurface preparation (sanding, blasting, cleaning)

Aureus Innovation helps clients bridge the gap between innovation and implementation, specializing in systems design thinking, systems engineering, systems architecture, and new product development. The company has completed two NASA-funded Phase I Small Business Innovation Research projects on model-based systems engineering and decision modeling, and has consulted a major Fortune 500 pharmaceutical company on portfolio modeling.

causal loop analysisdiscrete event simulationlife cycle analysismechanical analysis, simulation & optimizationModel-based systems engineeringmodel creation & maintenanceproduct designregenerative designsystems architecturesystems design thinkingSystems Engineeringtrade studiestraining

Automated Process Inc. is a Houston, Texas-based full-service manufacturer of custom machines, turnkey robotic process equipment, automation, assembly equipment, conveyors, fixtures, and special machinery. Founded in 2005, the company provides in-house machine design, build, and integration, serving industries including Oil and Gas, Consumer Products, Food and Beverage, Military/Defense, Energy, Medical, and Transportation.

assembly equipmentconveyorscutting and weldingelectrical designfabrication and weldingindustrial control panelsintegrationmachine control systemsmaterial handlingmetal finishingon-site repairprogrammingretrofit and rebuildrobotic automationthermal spray coating

Automation Technology Inc. (ATI) was founded in February 1982 in Dayton, Ohio, and manufactures electric motor testing systems and test/measurement equipment. ATI offers standardized test systems, custom testing solutions, test consoles and fixtures, and a series of control products including an Actuator for hydraulic valves. Its patented MagMap® and Digitorque® tests are used for motor, stator, and armature testing.

custom testing solutionselectrical engineeringresearch and engineeringsoftware developmenttest equipment manufacturing