overmolding

Accu-Mold Plastics, founded in 1972 as Accu-Mold & Tool Company in Halifax, PA, provides precision injection molding and mold/tooling design and development. The ISO-certified facility offers in-house mold design, tooling, and injection molding, serving industries including electronics and medical disposables with a geothermal-controlled Clean Room.

clean room moldingCNC Machiningheat treatinghigh-volume productioninjection moldinginsert moldingmanual machiningmold designpackagingpart assemblyprototypingsinker EDMsurface grindingtooling design

Alpha Products, Inc. was established in 1978 as a privately held California corporation. It is an engineering company providing design, engineering, manufacturing and administration services from its Alpha Center in Oxnard, California, serving OEM customers in telecom, broadcasting, audio, video, medical, automotive, test & measurement, RF & microwave, robotics, aerospace, and government/defense. It is a certified 100% small and minority owned business, ISO/QS 9000 compliant, and audited by Volkswagen to VDA 6.2.

cable assemblycontract manufacturingdesignengineeringharness assemblymanufacturingmetal machiningplastic moldingturnkey assembly

Manufacturer of Custom Cables and Cable Assemblies for the OEM Market Specializing in the engineering, rapid prototype, and manufacturing of low volume/ highly complex mix of electromechanical assemblies. Products manufactured range from simple wire assemblies to complex finished assemblies that contain a range of technologies in plastics, sheet metal, electronics, cable assemblies and plastic injected over molded parts. ACE has strong capabilities in manufacturing high level assemblies capitalizing on our in house manufacturing strengths as well as utilizing a controlled supplier base. Excelling in the low volume manufacturing environment by unrelenting attention to detail, staff and supplier communication, and a focus on process controls aimed at assuring every single product is manufactured correctly the first time and every time. ISO 9001 Registered IPC/WHMA-A-620 UL/CSA JCP.

cable assemblyCAD servicescontact terminationdesign assistanceDFMelectro/mechanical assemblyengineeringlow-volume manufacturingmaterial analysis/testingproduct testingrapid prototypingsupply chain managementtooling development

Amerline is a manufacturer and supplier of circular connectors and accessories, including stock and custom connector solutions. The company offers custom design engineering, overmolding, and value-added services, and has supported the military for over 40 years. Its connectors are interchangeable with military-style connectors and tested to endure impact, shock, and vibration. Amerline is ISO 9001:2015 certified and operates from Schiller Park, IL.

box buildsconnector customizationcustom design engineeringelectro-mechanical assemblyharness assemblyin-house machininglow pressure injection moldingprototype developmentSOLIDWORKS/CAD modeling

Ames Industries, Inc. Precision Tooling & Injection Molding Precision Tooling &Injection Molding Solutions Since 1984 Product Design & Development Ames Industries specializes in the design and development of precision thermoplastic injection molded components, delivering innovative, cost-effective solutions tailored to meet our customers’ unique requirements. Mold Fabrication Ames Industries combines engineering expertise with advanced manufacturing capabilities to develop high-quality thermoplastic injection molded components, delivering precision, performance, and value from initial concept through production. Custom Injection Molding Ames Industries operates two modern manufacturing facilities equipped with a comprehensive range of precision plastic injection molding machines, ranging from 17 to 275 tons. Our advanced equipment and manufacturing capabilities provide the flexibility.

CNC Machiningcomponent assemblydesign for manufacturability (DFM)Electrical Discharge Machining (EDM)FDM 3D Printingheat treatmentinjection moldinginsert moldingmicro and miniature component moldingmold design and fabricationmoldflow simulationprecision grindingultrasonic welding

Ames Corporation is a provider of high-performance elastomeric solutions and precision-engineered rubber components, serving industries including aerospace, defense, electrical, medical, inflatables, automation, safety, and transportation. Founded in 1949, the company offers development and contract manufacturing, backed by advanced manufacturing, laboratory capabilities, and elastomer expertise.

composite bondingcontract manufacturinginsert moldinglaboratory and developmentmaterial sourcingprecision moldingrobotic spray coatingtesting and inspection

Amphenol DC Electronics (ADCE) is a custom cable assembly and wire harness manufacturing company established in 1979 and acquired by Amphenol in 2013. It designs, engineers, and manufactures custom wire harnesses, cable assemblies, and integrated electronic mechanical devices (box builds) for aerospace and military, medical equipment, industrial equipment, and agriculture industries, with facilities in Silicon Valley and Nogales, Mexico.

box buildscable assembly manufacturingcable braidingCNC MachiningDesign Engineeringlean manufacturingprototypingwire harness assembly

Amphenol PCD is a manufacturer of interconnect products for military and aerospace harsh environment applications. It designs and manufactures circular and rectangular electronic connectors for low, medium and high power applications, and lightweight composite cable and pipe management solutions for wire, hydraulic and fuel systems. It also offers customizable cable assemblies, rugged network solutions, and in-seat portable electronic device power and audio solutions.

3d Printingadditive manufactured prototypingcable assemblyconnector manufacturingcustom interconnect systemsFEArapid part development

Applied Rapid Technologies (ART) Corporation is a rapid prototyping service bureau and subsidiary of Obsidian Solutions Group, founded in 1996. For more than a quarter century it has designed and delivered 3D printing prototypes and short-run production across industries including aerospace, medical, consumer goods, defense, sporting goods and electronics. It specializes in plastics using additive manufacturing processes, typically fabricating one to 10 prototypes per application but able to handle runs of several hundred.

3d Printingcast urethane castingrapid prototypingshort-run productionsilicone castingsilicone rubber toolingstereolithography

Aprios Custom MFG (formerly Diversified Plastics) is an employee-owned custom manufacturing company with over 48 years of experience, specializing in injection molding and additive manufacturing for mission-critical B2B devices. The company operates two facilities in Minneapolis, MN, and Vista, CA, and is ISO 9001, ISO 13485, ITAR, UL Blue, and FDA Registered.

additive manufacturingassemblyCarbon DLS 3D printingclean room manufacturingfinishingFirst Article inspectioninjection moldinginsert moldingIQ/OQ/PQ validationlabelingmicro moldingpackagingprototypingquality managementtooling

Cadence is a full-service medical device contract manufacturing organization (CMO) serving MedTech and Pharma OEMs worldwide. It provides early-stage product design and development collaboration through complete manufacturing and full supply chain management, with vertically integrated capabilities from concept to commercialization.

CNC sharpeningcomplex machiningCustom automation and semi-automationdeep drawDesign for Assembly (DFA)design for manufacturability (DFM)Finished device assembly and packagingFinite Element Analysis (FEA)FMEAinjection moldinginsert moldingmetal injection moldingPrecision laser processingprecision metal stampingProcess validation (IQ/OQ/PQ)rapid prototypingSterilization managementwelding

Carrio Cabling Corporation designs, engineers, and manufactures custom interconnects, including molded and non-molded cable assemblies, connectors, retractable coiled cables, power cords, RF coax, Camera Link cable assemblies, custom injection mold dies and parts, and custom screw machine terminals and hardware. Founded by Glen Carrio in 1988, all products are designed, engineered, and built in the United States. The company is certified to ISO 9001:2015 and ISO 13485:2016 and is a registered US Government Contractor (CAGE: 1JVJ0).

cable assembly manufacturingconnector manufacturingengineeringinjection moldingmold makingstereolithography (SLA) prototypingtoolingwire harnessing

Cavalier Cabling LLC manufactures precision-engineered mil-spec cable assemblies and wire harnesses for defense, aerospace, industrial, and automotive applications. Based in Port Huron, Michigan, the company offers full-scale production from rapid prototypes to production runs, engineering partnership with DFM feedback and material selection guidance, and quality assurance with full traceability and documented process standards.

cable assemblyconnector terminationcontinuity testingDFM feedbackFirst Article inspectionHi-Pot testinginsulation resistance testingmaterial selection guidancepull force testingwire harness manufacturing

CDM Inc. specializes in the distribution of interconnect products and manufacture of engineered cable assembly solutions. Founded in 1993, CDM employs certified assembly technicians, engineers, quality and interconnect industry professionals at facilities in New Jersey and Maryland, serving military, aerospace, commercial, telecom, medical, industrial and rail markets.

2-part casted overmoldingcable assemblyinjection overmolding

Cadrex is one of the largest manufacturing partners in North America and the largest mechanical solutions provider, with 22 facilities across nine states and Mexico. Working with innovative companies worldwide, Cadrex offers sheet metal fabrication and stamping, precision CNC machining, plastic injection molding, welding, assembly and integration, and supply chain management, taking customer programs from concept and prototyping through to full-scale production.

assemblyAutomated Hardware InsertionAutomated Panel BendingCNC Machiningconcept developmentCustom Automation ProgramsDedicated Prototyping Centerdesign for manufacturabilityfinishinginjection moldingmechanical assemblymetal stampingpaintingpainting & finishingplastic injection moldingprecision CNC machiningprototypingRobotic Press Brake Formingrobotic weldingsheet metal fabricationsheet metal stampingstructural foam moldingsupply chain managementsystem integration and testingSystem Integration Testingtool design and buildwelding

Connective Design, Inc. (CDI) is an ISO 9001:2015 certified, woman-owned small business manufacturer of active and passive interconnect products, with over 34 years of experience. Located in Miamisburg, Ohio, CDI manufactures MIL-SPEC connectors, contacts, cable assemblies, and connector accessories, and offers machining, metal bending and forming, reverse engineering, and kitting and assembly services.

cable assemblyCNC Machiningconventional machiningkitting and assemblymetal bending and formingmetal fabricationnew product design supportReverse Engineeringwire harnesses

Da/Pro Rubber, Inc. is a custom molded rubber and plastic manufacturer founded in 1961 when Charles Daubenberger Sr. developed a unique low-pressure press for compression molding rubber. The company precision molds custom parts for applications including healthcare, aerospace, electronics, industrial, and oil & gas, and operates a Class 10,000 clean room. Its custom molded parts have been shipped to 50 countries.

compression moldingcustom compoundinginjection moldingliquid injection moldingmicro moldingplastic injection moldingtool design and fabricationtransfer moldingtwo-shot molding

DDH Enterprise, Inc. is a privately held contract manufacturer of cable, wire harness, and electromechanical assemblies, incorporated in 1988 and owned and operated by the Du family. It has manufacturing facilities in Southern California (Vista, CA) and Asia (DDH Vietnam and DDH China), and serves industries including transportation, telecommunications, medical, industrial, power, commercial, EV, and military/aerospace.

100% inspection and testBox buildcable assemblyelectro/mechanical assemblyEngineering Servicesglobal supply chain managementinjection moldingJIT deliverypottingwire harness production

Distinctive Plastics, Inc., also known as DPI, is a contract manufacturer founded in 1981 specializing in full-service technical injection molding solutions. Based in Vista, California, DPI offers product development, tooling design and building, injection molding, assembly and welding, and in-mold decoration. The company is ISO 13485 and ISO 9001 certified, FDA registered, EcoVadis listed, and UL listed.

2-shot moldingCAD solid modelingCAM programmingClass-8 clean room manufacturinghot stampinginjection moldingin-mold decorationinsert moldingmedical device assemblymold designMold Flow analysispad printingpost-mold drillingpost-mold millingtool buildingultrasonic welding

EI Microcircuits is a high-mix, low-to-mid volume electronics manufacturer specializing in complex assemblies. It offers full box-build services and add-on capabilities including test development, engineering services, and logistics, serving industries such as medical, defense, industrial, energy, agriculture, high performance computing, aviation, military, and security and surveillance.

Box buildcoatingEngineering ServiceslogisticsPCB inspectionPCB productionPCB prototypingpottingSMTsurface-mount assemblytest developmenttestingthrough-hole assembly

Emerald Technologies is a global contract manufacturing and design firm offering high-reliability electronic manufacturing services and complete product life-cycle solutions. It serves high-reliability end markets including Aerospace & Defense, Energy & Renewables, Life Sciences, Industrial & Semiconductor, and Enterprise Communications, with facilities in the USA, China, and Malaysia.

automated optical inspectioncable harness assemblyConformal coatingDesign Engineeringdesign layoutDFM/DFTflying probe testingfunctional testingin-circuit testingPTH assemblyselective solderingshock and vibration testingSMT assemblysystem assemblythermal cycle testing

Felton is a custom design and manufacturing company based in Londonderry, New Hampshire, operating from a 75,000 sq. ft. facility. Founded in 1852, it provides complete manufacturing services including engineering, machining, molding, extrusion, forming, welding, assembly, and finishing, along with engineered brushes and seals. The company is AS9100D and ISO 9001:2015 certified and serves OEM and industrial customers from prototype through production.

3D printing (FDM and SLS)assemblyCNC Machiningextrusionfabricationforminginjection moldinglow pressure moldingwelding

Florida RS Technology is a manufacturer of quick-turn, build-to-print fiber optic cable assemblies, electronic wire harnesses, semi-rigid/flexible RF cable assemblies, and electro-mechanical box builds. Founded more than 24 years ago designing custom cable tooling, it serves the military/defense, commercial aerospace, medical, rail, industrial, and telecom markets. It is AS9100 and ISO 9001:2015 certified, ITAR registered, and manufactures in Palm City, Florida.

electro-mechanical box buildsEncapsulationfiber optic assemblyfull-rate productionmechanical and electrical designprototypingtestingwire harness manufacturing