injection molding

A3D Manufacturing performs additive manufacturing in-house at its Phoenix facility and coordinates traditional and hybrid services such as CNC machining, injection molding, and cast urethane through a vetted supplier network. The company is ISO 9001:2015 and AS9100:2016 certified and ITAR registered, serving industries including aerospace, medical, defense, automotive, and consumer products from prototype to full production.

3D printingadditive manufacturingbead blastingcast urethaneCNC machiningpost-processingsheet metalvapor smoothing

A. B. Carter, Inc. is headquartered in Gastonia, North Carolina, and manufactures yarn spinning solutions for the textile industry, with over 100 years of experience. The company has offices in 5 countries and agents in 44 countries, and is a certified ISO9001 manufacturing facility.

annealingheat treatingmanufacturingmetallurgical lab testingPSC 3030PSC 9505vertical integrationwire drawing

Abtec Inc. is a plastic injection molding company located in Bristol, Pennsylvania, with over 100 years of combined experience in the design, development, and manufacture of custom injection molds and support tooling. The company offers full-service thermoplastic injection molding, tooling, prototyping, and value-added secondary services, serving the mid-Atlantic region, the United States, and global customers. Abtec is ITAR/DOD Registered/Compliant and ISO 9001:2015 certified.

3D modelingassemblyclean room manufacturingCNC machiningheat stakingHot Stampinginsert moldingmold makingover-moldingpackagingpaintingUltrasonic Welding

Accu-Mold Plastics, founded in 1972 as Accu-Mold & Tool Company in Halifax, PA, provides precision injection molding and mold/tooling design and development. The ISO-certified facility offers in-house mold design, tooling, and injection molding, serving industries including electronics and medical disposables with a geothermal-controlled Clean Room.

clean room moldingCNC machiningheat treatinghigh-volume productioninsert moldingmanual machiningmold designovermoldingpackagingpart assemblyprototypingPSC 6515PSC 9330sinker EDMsurface grindingtooling design

ACE Rubber Products, Inc.ACE Rubber Products, Inc. began in 1988 under the name Specialty Rubber to be a manufacturer of custom molded elastomatric products.The founders are experienced rubber molders and mold makers; their careers spanning an excess of fifty years collectively. Their commitment to produce the best product to meet your requirement is the objective of our company.To this end our employees are selected and trained to become proficient in the tasks required of them. Equipment has been obtained and custom configured to allow their efforts to produce the repeatable and consistent results our customers rely on.Throughout all of the processes that make a product a success, our driving commitment to our customers' satisfaction can be seen.Many times we are called on to "reverse engineer" an elastometric product or device. This ranges from balls to wave guide connectors. Another.

cryogenic deflashingextrusionmold makingpreformingreverse engineeringrubber moldingrubber to metal bonding

Additive at Scale is a multidisciplinary team of engineers, designers, and technicians based in Bryan-College Station, Texas, providing end-to-end engineering and scale-up manufacturing services. Founded in January 2020 as a division of Axle Box Innovations, the company offers additive manufacturing, rapid manufacturing, and design/engineering support to accelerate innovation through advanced rapid manufacturing solutions.

3D modeling3D simulationsadditive manufacturingbridge toolingcomposite layupdesign for additive manufacturing (DFAM)design for manufacturing (DFM)generative designmechanical and electrical engineeringpolyurethane and silicone castingPSC 1055PSC 1095PSC 1680PSC 5340PSC 5342PSC 5935PSC 5970PSC 5975PSC 9390PSC AC12PSC AJ11PSC H199PSC J034rapid prototypingtopology optimization

ADS is a global leader in the design and manufacture of decorative plastics for the automotive, medical and consumer markets. With over 100 years experience and production facilities in four countries, ADS manufactures In-Mold decorated products with each facility fully self-contained and independent of sub-contractors.

assemblyCAD/Designdie cuttingFilm Insert MoldingformingGreasingHeat StreakingHot StampingIn Mold DecorationPad PrintingPaint & Laser EtchingPlasma TreatingprintingthermoformingUltrasonic Welding

Advanced Powder Products, Inc. (APP) is a metal injection molding company based in Philipsburg, PA. It combines custom metallurgy, technical leadership, and vertical integration to deliver precision metal injection molded components from prototype through production, serving industries including medical devices, aerospace, defense, sporting goods, and industrial manufacturing.

binder jet 3D metal printingcoatingdebinding and sinteringfeedstock compoundingheat treatingin-house tool design and buildmetal injection moldingPSC C215quality control

Advangene Consumables, Inc. (Advangene) was incorporated in 2005 with a team of global experts in life science and plastics manufacturing. It provides high tech disposable plasticware under the ADVANGENE brand name for biotechnology, pharmaceuticals, diagnostic laboratories, and chemical and environmental testing. Products are designed to offer high quality plasticware at low cost to life science and chemistry laboratories.

clean room for DNA/RNA free productsISO9001/ISO13485 quality systemmembrane coating/surface treatingpacking/material

AGC Acquisition LLC is a supplier of precision aerospace components and complex assemblies, serving military and commercial enterprises worldwide. Founded in 1951, the company operates a 110,000 square foot plant in Meriden, Connecticut, and has over 60 years of experience in metallic and non-metallic processes.

assembly manufacturingmetal-to-plastic bondingmetal-to-rubber bondingOEM project managementPSC 5331rubber moldingsheet metal formingTeflon moldingtitanium hot formingtool makingurethane bondingurethane molding

Albany International Corp. is a materials science developer and manufacturer of engineered components, headquartered in Rochester, New Hampshire, operating 30 facilities in 13 countries and employing approximately 5,600 people worldwide. It is listed on the New York Stock Exchange (Symbol AIN) and has been in materials science since 1895. It operates two core businesses: Albany Machine Clothing and Albany Engineered Composites.

2D and 3D weavingAssembly Integration and FabricationAutomated Fiber PlacementAutomated Tape LayupbraidingDesign, Testing and AssemblyEngineering / DesignEnhanced Filament WindingNon-Destructive InspectionResin Transfer Molding and Controlled Volume Molding

» Company Alexandria Industries is a multifaceted manufacturer that goes beyond being a parts supplier. We make components that go into products people use everyday. Since our founding in 1966, we have committed to helping customers create innovative manufacturing solutions that solve their product development challenges. We have achieved this by integrating the latest advancements in manufacturing and automation technology, focusing on continuous improvement strategies, and building a highly skilled workforce. Guided by our values and a servant leadership mindset, we are dedicated to our customers, colleagues and communities. Who We Are Learn about Alexandria Industries—our Purpose, Values, Locations, Leadership, Workplace Ministry, Community Involvement, and our Safety and Sustainability initiatives. See what we do by watching our Virtual Tour and reading about our History. Careers.

aluminum extrusionanodizingassemblybendingbroachingCNC machininggrindinghoningMIG weldingpolyurethane moldingpunchingstretch formingTIG weldingturning

ALine, Inc. is a microfluidic engineering and manufacturing company established in 2003 in Los Angeles, now located in Signal Hill, CA. It designs, engineers, and manufactures commercial-ready microfluidic products and devices, including single-use diagnostic cartridges, multiplexed fluid handling manifolds, cell culture and organ-on-a-chip devices, wearables, and gas sensors. The company operates under an ISO 13485 certified quality system with a Class 7 clean room.

cleanroom assemblyCNC machiningdesign for manufacturedie cuttingengineeringlaminate fluid circuit technologymanufacturingmicrofluidic designpilot productionprototypingwet lab testing

Allied Materials & Equipment Company, Inc. is a Kansas City, Missouri manufacturer founded in 1951 by WWII veteran Louis Pack. It produces American flags, jigsaw puzzles (Springbok Puzzles), and photo, flag case, and certificate frames, and has served as a prime contractor for defense products. The company is ISO 9001:2015 compliant and certified ITAR, GIDEP, and DDTC, operating a 100,000 square foot facility plus an embroidery plant in Bogalusa, Louisiana.

die cuttingEmbroideryfoam formingGovernment Contractinglaminationresin manufacturingtextile manufacturing

ALLJACK is a Taipei, Taiwan-based tier 2 OEM and contract manufacturer specializing in precision metal and plastic parts, providing OEM service from first article to mass production. Founded in 2013, it serves aerospace, medical devices, commercial electronics, robotics, electric vehicles, security, and startups, with a business base mainly in North America and expansion to Israel, Germany, and Japan.

5-Axis CNC machiningCNC machiningCNC Turn/Milldie castingPSC 1550PSC 1560PSC 1675PSC 1680PSC 2590PSC 3413PSC 3414PSC 3415PSC 3416PSC 3417PSC 3418PSC 3426PSC 6532PSC 6615rapid prototypingsilicone rubber moldingstampingvacuum casting

Alta Max LLC has been providing Mil Spec specialty/military packaging and tamper evident security products since 2001. It is a HUBZone certified small business operating from a 44,000 sq ft facility in New Orleans, Louisiana. The company manufactures military packaging for ammunition and ordnance, specialty and commercial packaging, custom parts and assemblies, and tamper evident security seals, and also performs contract packaging, consultation, and engineering/design.

contract packagingconverting tapes and adhesivesdesign consultingengineering/designmanufacturingPSC 3990PSC 5330PSC 5510PSC 8105PSC 8115PSC 8135PSC 8140PSC 8305PSC 9330PSC C215PSC L081testing

AMAC Plastic Products Corp is a manufacturer and distributor of packaging and organization products for the home and office. Since 1960, AMAC has created stock and custom packaging. In 2006 it founded AMAC Asia, a Hong Kong-based company with offices in Shenzhen, China, to build tooling and manufacturing capabilities beyond its US injection molding operations.

manufacturingproduct developmenttooling

American Epoxy & Metal (AE&M) fabricates precision custom cases, encapsulation cups, bobbins and spools, terminal boards, headers and covers for electronic and mechanical applications, aerospace and military. Products are custom made to any size and shape, and the company offers custom compression and injection molding of DAP thermoset material and injection molding of thermoplastics such as ABS and Ryton R-4 (PPS).

CNC machiningcompression moldingcustom fabricationPSC 1420PSC 1560PSC 1680PSC 2895PSC 5963PSC 5998PSC 6160PSC 9390PSC H281

Founded in 1989, Ameripack is a manufacturer and distributor of carrying, shipping, rack-mount, and panel-mount hard cases. Ameripack has a sales office in New Jersey and stocking warehouses across the United States, and services accounts worldwide in markets including Military, Medical Diagnostics, Occupational Health & Safety, Oil and Gas Analytical Instrumentation, Avionics, and Government Agencies. Its injection molded and rotational molded cases are airtight, watertight, crushproof, dustproof, and meet or exceed ATA and military specifications.

blow moldingcase labelingcustom foam insertsEMI/RFI shieldingpanel mountingrotomoldingvacuum molding

Ames Industries, Inc. Precision Tooling & Injection Molding Precision Tooling &Injection Molding Solutions Since 1984 Product Design & Development Ames Industries specializes in the design and development of precision thermoplastic injection molded components, delivering innovative, cost-effective solutions tailored to meet our customers’ unique requirements. Mold Fabrication Ames Industries combines engineering expertise with advanced manufacturing capabilities to develop high-quality thermoplastic injection molded components, delivering precision, performance, and value from initial concept through production. Custom Injection Molding Ames Industries operates two modern manufacturing facilities equipped with a comprehensive range of precision plastic injection molding machines, ranging from 17 to 275 tons. Our advanced equipment and manufacturing capabilities provide the flexibility.

CNC machiningcomponent assemblydesign for manufacturability (DFM)Electrical Discharge Machining (EDM)FDM 3D printingheat treatmentinsert moldingmicro and miniature component moldingmold design and fabricationmoldflow simulationovermoldingprecision grindingPSC 9330Ultrasonic Welding

Amorim Cork Solutions designs sustainable composite solutions from cork, aiming to value cork across multiple applications. The company states it is the cork industry world leader and part of the Amorim Group, recycling, reusing and reinventing natural and organic materials. It develops cork-based products for construction, home and office decoration, design objects, and hi-tech industries, and emphasizes sustainability and environmental responsibility.

3D printing in constructioncomposite material designextrusionmultilayer panel productionsealing solutionsthermal insulationvibration and noise control

Aprios Custom MFG (formerly Diversified Plastics) is an employee-owned custom manufacturing company with over 48 years of experience, specializing in injection molding and additive manufacturing for mission-critical B2B devices. The company operates two facilities in Minneapolis, MN, and Vista, CA, and is ISO 9001, ISO 13485, ITAR, UL Blue, and FDA Registered.

additive manufacturingassemblyCarbon DLS 3D printingclean room manufacturingfinishingFirst Article Inspectioninsert moldingIQ/OQ/PQ validationlabelingmicro-moldingovermoldingpackagingprototypingPSC 2920PSC 3695PSC 6515quality managementtooling

Arbor Arms is a disabled veteran-owned business founded by Jonathan and Nick, who use their experience in Special Operations communities to design tactical gear. All products are handcrafted in the United States of America. The company designs gear for military, law enforcement, and low-vis operations, including cummerbund kits, plate carriers, belts, packs, and pouches.

gear designhandcrafted manufacturingmetal goodssewingthermo-form plastics

Armada Rubber Manufacturing Company is a family-owned rubber molder in Armada, Michigan, founded in 1947. It molds small- and medium-sized custom and standard rubber components, is an approved source to major OEMs and their suppliers, and operates under an IATF 16949 quality system with ISO 14001 certification. The company has a 51,000 sq. ft. plant and compounds rubber on site.

ASTM D2000 testingBanbury mixingcryogenic de-flashcustom product design and compound formulationinjection-transfer moldingprototype moldsPSC 5330PSC 9320rubber compounding on sitetransfer molding