custom molding

AAA Stucco is a full-service stucco company serving Wyoming and Northern Colorado with over 25 years of combined experience. They specialize in traditional stucco and synthetic stucco (EIFS), and are licensed and insured. They handle residential, commercial, and restoration projects, including new construction, remodels, repairs, chimneys, color matching, custom molding, decorative stucco, and custom textures and colors.

color matchingcustom texturesdecorative stuccoremodelingstucco constructionstucco installationstucco repairstucco restoration

ACON Laboratories, Inc. is a global medical device manufacturer and distributor of in-vitro diagnostic (IVD) products, headquartered in San Diego, California. For more than two decades it has made high quality diagnostic and medical devices more affordable worldwide, with products used in hospitals, clinical laboratories, physician offices, blood banks, pharmacies and veterinary clinics. It operates an FDA-registered, ISO 13485 certified manufacturing facility in Hangzhou, China and a plant in Tijuana, Mexico.

assemblycontract manufacturingcustom designmanufacturingOEMpackaging and labelingResearch and Development

Advanced Eye Prosthetics is an ocularistry practice based in Lehi, Utah, serving Utah, Idaho, Wyoming, Montana, and Nevada. Founded in 2022 by ocularist Travis Petersen, it creates custom-made, lifelike prosthetic eyes using innovative techniques, state-of-the-art technology, and hand-painting, with a focus on compassionate, individualized patient care.

digital imaginghand paintingpolishing and resurfacingprosthesis fabricationultra-violet sanitation

Arizona Sealing Devices, Inc. is an ISO 9001:2015/AS9120B certified, woman-owned distributor of high-quality sealing products based in Chandler, Arizona. Founded in 1989 as an O-ring supplier, it has expanded to offer caps, gaskets, plugs, seal kits, and other sealing devices for industries including medical, food and beverage, wastewater, aviation, and military applications.

assembly and kittingcustom shippingdie cuttinginventory managementpackagingvulcanizing

Aurora Microplates produces high-performance COP microplates for imaging, high-content screening, and discovery workflows. In partnership with Zeon Specialty Materials and Edge Precision Manufacturing, Aurora delivers clarity, flatness, and reproducibility with a supply chain controlled from resin to finished plate within the Zeon ecosystem. Plates are made using ZEONEX and ZEONOR Cyclo Olefin Polymer (COP) resins and strict cleanroom standards.

bar codingbondingcleanroom manufacturingcoatingfilm productioninjection moldinglaser weldingprecision manufacturingtissue-culture treatment

Bay Seal Company began in 1957 as a branch office of the Porter Seal Company and purchased Porter's Hayward office in 1972, changing its name to Bay Seal Company. It is a manufacturer and distributor of gaskets and sealing products with a large inventory and highly trained staff, and opened a second office in Austin, Texas in 1993. In 1999 it purchased Leonard's Molded Products to provide custom rubber shapes.

distributionfabricationlathe cuttingsplicing

Buckhorn Inc. specializes in high-quality, injection-molded plastic packaging designed for modern supply chains, manufacturing reusable packaging solutions including bulk containers, pallets, and hand-held containers. The company modifies existing products and designs and custom molds containers, pallets, and proprietary products, managing projects from conception to final delivery. Buckhorn is a Myers Industries Company.

application engineeringcustom packaging designinjection moldingmanufacturingproduct design

Caldwell Corporation, located in Emporium, PA, is a family-owned precision machining and contract manufacturer that has provided machining and manufacturing services for over 30 years. Founded in 1987 as Caldwell Machining by Joseph L. Caldwell and his son Tom Caldwell, it was renamed Caldwell Corporation in 1993. Its Quality Management System is ISO 9001:2015 and AS9100D certified, and it serves industries including automotive, lighting, and electronics.

CNC millingCNC turningfabricationmachinery repairprecision grindingrapid prototypingReverse Engineeringtooling and fixturingwelding

California Sealing Solutions (CSS) specializes in custom parts and sealing components, producing standard and custom parts including metal stampings, machined metals, aluminum die casting, plastic injection molding, plastic and rubber extrusions, O-rings, oil seals, custom molded rubber, pump repair kits, and custom cables and wire ropes. The company offers in-house prototyping, an extensive inventory of standard parts, free samples to qualified customers, and serves industries such as general aviation, medical equipment, water filtration, irrigation sys

aluminum die castingcustom packaging and labelingdesign and application recommendationfourslide processesin-house prototypingplastic injection moldingprogressive die stampingrubber extrusionshort-run stampingwire forming

Caplugs is a global manufacturer of product protection, masking, hose protection and custom molded solutions, offering plastic, vinyl, and rubber parts. The company has over 75 years of experience, serves more than 30,000 customers across 30+ industries, and operates 13 manufacturing facilities with 3 U.S. manufacturing facilities. It is ISO 9001:2015 certified.

distributionfull productionmanufacturingrapid prototypingsame day shippingtool buildtool design/DFM

C & M Rubber Co., located in Dayton, Ohio, specializes in the fabrication of custom rubber products using silicone and other synthetic thermosetting elastomers. Founded in 1964 by Bill Crawford and Al McCloskey, the company is an ISO 9001:2015 certified custom manufacturer serving the military, medical, food service, aerospace, and high technology industries.

compression moldingcustom elastomer compoundingcustom toolingheater & sensor encapsulationliquid injection moldingprototyping & design reviewsilicone to metal bondingtransfer molding

Cosmo Corporation is a leading supplier of coil bobbins, knobs, and precision engineered plastic components to the global electrical and electronics industries. Since 1945 its in-house tooling facilities have built more than 15,000 custom molding tools.

in-house toolingprecision engineered components

Custom Orthotics and Prosthetics in Kansas City Custom-Fit Devices From a Team That Stays With You Request a Consultation Since 2012, Cotton Orthotic and Prosthetic Associates has helped Kansas City patients improve their daily mobility. Our practice was founded by Dan Cotton, an ABC-certified prosthetist-orthotist with more than 25 years of experience. Dan Cotton, an ABC-certified prosthetist-orthotist, leads our care team. Together, our team provides custom molding, fitting, adjustments, and prosthetic socket fabrication at our Overland Park clinic.We work with patients of all ages and functional abilities, from young children in their first brace to athletes training for a comeback. Let us know your mobility needs, and we’ll build custom orthotics and prosthetics to match. Schedule a Consultation Explore Our Services Advanced Prosthetics Explore custom prosthetic options for.

adjustmentscoordination with physicians and physical/occupational therapistsfittingpost-operative managementpre-operative consultationsprosthetic socket fabrication

East Texas Seals, LLC is a distributor of Parker sealing products and a supplier of manufactured and custom-designed O-rings and rubber seals. The company offers O-rings, hydraulic seals, gaskets, custom-engineered solutions, custom molded products, kitting, inventory management, and laser product marking. It serves industries including oil and gas, aerospace, automotive, manufacturing, chemical processing, food and beverage, and pharmaceuticals. ETS is a division of Aberdeen Dynamics and holds ISO 9001 quality controls.

bar codingcustom compoundingdistributioninventory managementkittinglaser marking

EMI Conductive Rubber is a family owned and operated small business that specializes in manufacturing conductive rubber gaskets for specialized equipment. All designing processes and most manufacturing processes are handled in house at the company base in Brea, California. Conductive elastomers are used in EMI shielding and as pressure and moisture seals for aerospace, electronics, and medical applications.

custom extrusioncustom molded O-ringscustom molded sealsdie cut gasketsin-house designmanufacturing

FallLine is a custom molded polyurethane and cast urethane parts manufacturer established in 1981. It manufactures and distributes polyurethane products for industrial applications, including ski industry products, snow removal, cable protection, and asphalt sectors. Its 35,000 square foot headquarters in Reno, Nevada operates multiple production lines and an in-house machine shop with CNC machinery for precision tooling and metal inserts.

cast urethane manufacturingCNC Machiningcustom mold developmentdesign-for-manufacture guidancedistributionin-house toolingpolyurethane formulationprecision toolingprint shoprapid prototypingsnow hose testing

FIMOR NORTH AMERICA, formerly known as Harkness Industries, manufactures and distributes a complete range of polyurethane cast distribution products and custom molding from its facility in Cheshire, CT. Harkness became part of FIMOR in 2017, and the Cheshire site has served customers since 1962. The company also warehouses FIMOR LE MANS squeegee parts and sheets for distribution.

cast polyurethane manufacturingcentrifuged castingco-molding onto metal and other materialsdistributionmachining polyurethanemanual and automated polyurethane dispensingopen cast and closed mold techniques

Fluorolite Plastics LLC is a woman-owned business that specializes in replacement fluorescent and LED light covers and diffusers for commercial and residential lighting fixtures. They replace yellowed, broken, and missing diffusers, offering products like wraparound covers, flat sheets, louvers, vapor tight lenses, and tube guards, with over 45 years of experience.

cut-to-sizelaser cuttingvacuum forming