vibration testing

DynaQual Test Labs is an ISO/IEC 17025:2017 accredited (PJLA #79999) environmental and reliability testing laboratory based in Houston, Texas, and a NASA-approved test vendor. Founded in 2012, it has conducted testing for more than 340 customers and completed over 1,500 qualification programs, serving oil & gas, aerospace, medical, defense, electronics, and transportation industries.

custom test fixture design and fabricationdata analysisHALT/HASS testinghelium mass-spectrometer leak detectionhumidity testinghyperbaric pressure testingpackage and drop testingshock testingtest plan developmentthermal cycling

DynaTech Engineering, Inc. is a consulting firm specializing in rotating machinery analysis and testing, established in 1995. Clients include industrial and aerospace organizations and government agencies such as the Air Force, NASA, and the Navy. The firm combines advanced analytical and testing techniques to provide rapid, comprehensive, and cost-effective solutions.

dynamic analysis of components and systemsengineering software developmentfinite element analysisrotor dynamic analysis

EHP develops, produces and qualifies thermal and mechanical components and systems for spacecraft based on two-phase heat transfer technology, including heat pipes, loop heat pipes and thermal bus subsystems, as well as deployable equipment such as deployable radiators and pointing systems. The company has in-house design, manufacturing, assembly, integration, inspection and test facilities, and provides test services to external customers.

assemblyclimatic testingdeployable systems manufacturingdesignheat pipe manufacturinginspectionintegrationloop heat pipe integrationmanufacturingpenetrant inspectiontestingthermal bus subsystem integrationthermal vacuum testingX-ray inspection

E-Labs, Inc. is a full service testing and evaluation laboratory providing accredited environmental, vibration, and EMI/EMC testing for aerospace, defense, and commercial clients. The main scientific testing facility includes over 50,000 square feet of floor space, and personnel have decades of hands-on lab experience across testing disciplines for the Aerospace, Automotive, Military, Commercial, Electronics and IT industries.

climatics testingEMI/EMC testingEnvironmental testingfixture design and fabrication consultinghelium leak detectionlab testing and reportingmunitions testingpressure testingshock testingtest planningthermal vacuum testing

Electronic Concepts, Inc. is a manufacturer of film capacitors, serving customers since 1969 from Eatontown, New Jersey, with an additional location in Co. Galway, Ireland. The company performs contract R&D for universities, private institutions, and government labs, and offers engineering support for capacitor applications.

aluminum vapor depositioncapacitor windingDielectric testingfilm stretching orientationmetallized film conversionslittingterminal stampingthermal cyclingtool and die manufacturingvacuum processingwelding

Engineered Pump Services, Inc. (EPS) specializes in pump repairs, parts, evaluations, inspections, field services, and engineering. Established in 1996, the company operates over 38,000 sq. ft. of floor space 20 miles SW of Milwaukee and serves electric utilities, municipalities, and industries including steel, mining, paper, oil, and brewing. EPS provides dedicated engineering support both in its facility and at plant sites, with 24/7 availability and on-site response in most cases under 24 hours.

3D scanningassemblyfield serviceflow testingmachiningmillwright laboron-site troubleshootingpump rating/efficiency evaluationspump repairsre-manufacturingsystem evaluations

Engineered Testing Systems (ETS) is an ISO 17025 accredited commercial testing laboratory located in Indianapolis, Indiana, in its current location since 2000. ETS is a full service test lab specializing in testing of military, aerospace, automotive, and medical equipment, and is accredited to perform FCC Part 15 EMI testing.

acceleration testingaltitude testingblowing rain testingconducted emissions testingconducted susceptibility/immunity testingdrip testingelectrostatic discharge testingFCC Part 15 EMI testinghumidity testingiNARTE certified staffISO 17025 accredited testingradiated emissions testingradiated susceptibility/immunity testingrandom vibration up to 15,000 force poundsshock testingsine vibration up to 17,000 force poundstemperature testing

ESL Labs (ESL Technology Inc. doing business as ESL Labs) is an AS9100D-certified environmental, material, and EMI/EMC testing lab based in Dartmouth, Nova Scotia, Canada. It is a division of J-Squared Technologies and has over 30 years of experience serving defence, aerospace, marine, oil and gas, power generation, and ocean technology sectors. The facility is Canadian Controlled Goods Program (CGP) certified and Joint Certification Program (JCP) registered.

climatic testingcorrosion testingcustom fixture developmentEMI/EMC testingEnvironmental testingmaterials testingmechanical shock testingpressure testingsemi-anechoic EMC chamber testingtest tailoring

Calcoast-ITL is a fully accredited automotive testing laboratory specializing in vehicle lighting and roadway safety systems. Founded in 1949 as Industrial Testing Laboratory (ITL) and purchased by Calcoast Laboratory in 1988, it provides photometric, colorimetric, environmental, and physical testing, regulatory compliance consulting, and expert witness services for automotive, micromobility, public safety, construction, and transit industries. Its ISO/IEC 17025-accredited lab serves over 200 clients, including the U.S. and Canadian governments.

colorimetric testingEnvironmental testingexpert witness testimonyphotometric testingphysical testingR&D supportregulatory compliance consulting

Experior Laboratories, LLC is a Southern California-based, privately held third-party test laboratory founded in 2003, providing independent design verification and qualification testing services to component and system manufacturers, military contractors, integrators and system providers in the Telecommunication, Military, Aerospace, Space, Industrial, Medical and other industries. Headquartered in Oxnard, CA, it occupies approximately 70,000 sq ft in a multi-building campus.

altitude testingassembly and integrationcryogenic testingdirect field acoustic testingEMC testingESD testingfiber optic testingfixture design and analysisfungus testingHIRF testinghumidity testingingress protection testinglightning testingmechanical shock testingsalt spray testingsand and dust testingthermal shock testingthermal vacuum testingX-ray analysis

Flight Enabled is a Murray, Utah shop (not an airline) focused on safe, quiet, practical flight. It has been hibernating for years and is considering a restart late this year; hardware, including a skeleton airframe, remains in storage while it secures workspace in the Salt Lake Valley. Prior bench work with large motors and propellers is paused. It does not currently offer passenger flights, deliveries, certified aircraft, aircraft sales, or a flying fleet. It is the parent of Still Has Value and Similarize.

bench work with large motors and propellerscodingpropeller CADRC flyingwelding

F3 Engineering delivers technology, products, and services for mission-critical aerospace and defense applications. It specializes in manufacturing critical components for aircraft, support equipment, ALRE, Navy, CAI, CSI, nuclear-powered submarines, and communication equipment, and is ISO 9001 and AS9100 certified.

adhesive bondingCMM & optical measurementcomputerized hardness testingdry & chemical film applicationheat treatmentload testingmicroprocessor programmingnon-destructive testingpaintpassivateprecision metal stampingreverse engineeringsandblastingspun products

Frank Bacon Machinery Sales Co. is a family owned and operated provider of new, used and remanufactured testing equipment with over 70 years of experience rebuilding equipment. The company is recognized as having the world's largest inventory of surplus testing and inspection equipment, and offers ISO 17025 A2LA accredited calibration with a full service department. Founded in 1953 in Detroit, MI, it has grown to a 30,000 sq. ft. facility in Warren, MI.

calibrationcompression testingfatigue testinghardness testingimpact testingrebuildingreconditioningrepairretrofittingtensile testingtorsion testingupgrading

HI-TEST Laboratories, Inc. is a Certified HUBZone Small Business testing, research and design facility in Arvonia, VA, providing testing and evaluation services to government and industry since 1975. Its 1,300-acre facility includes 3 test pond basins, cranes up to 300 tons, and an indoor barge outfitting facility. It is the only commercial facility offering all NAVSEA-approved MIL-DTL-901 shock testing facilities.

data acquisitionfailure mode effects and criticality analysisfinite element analysisfixture design and fabricationinstrumentationisolation system designshock testingtest plan and procedure writingunderwater shock analysis

Industrieanlagen-Betriebsgesellschaft mbH (IABG) is an owner-managed high-tech service provider headquartered in Ottobrunn near Munich, Germany. It offers independent, product-neutral consulting and technical and scientific services for safety-relevant systems and technologies, serving industry and the public sector nationally and internationally with around 1,200 employees.

acoustic testingCyber securityelectromagnetic testingenvironmental simulationfailure analysisgeodata analysishigh-performance computinghigh-risk testinglifecycle managementmaterial testingproduct qualificationseismic testingshock testingSystems Engineeringtest bench constructiontest centre planning

Inertia Switch Inc. is a full-service design, engineering, and manufacturing firm founded in 1950 that specializes in acceleration switches of all kinds, and also manufactures limit switches, prostheses, incandescent digital displays, and other standardized and unique products. The company serves military, aviation, space, marine, industrial, transportation, laboratory, and medical fields, and is AS9100 certified and ITAR registered.

5 axis Vertical Machining Centers7 axis Turret/Gang Style Turning9 axis Swiss Style Turningacceleration testingaltitude testingclean room assemblyCNC machiningdesign and engineeringelectrical testingEMI testinghumidity testingrapid prototyping using 3D printerssand & dust testingseal testingshock testingsolderingtemperature shock testing

Island Components Group, a G.W. Lisk Company, designs and manufactures high-performance motors, electromechanical servo-actuators and rotating components in the precision motion industry, serving aerospace, defense and space customers with advanced design capabilities and superior customer service.

assemblyCNC machiningcustom windingdesigninspectionmanual windingprototypingsimulationtestingthermal cyclingthermal vacuum testingtoroidal winding