structural steel fabrication

A-1 Steel, Inc. is a family-owned and operated steel and rebar fabrication and installation company in Northern Nevada, established in 1984. It provides structural steel and rebar fabrication and installation, with in-house detailing and estimating, and has worked on projects including the University of Nevada, Reno Lincoln Hall Renovation, LifeChurch Reno, the Coconut Bowl, and the Wild Island Family Adventure Park.

estimatingin-house detailingproject managementrebar fabricationrebar installationstructural steel installation

ABUCK, Inc. is based in the Atlanta, GA area and has been serving the Southeastern United States since 1973, providing construction services to the commercial, industrial, and communication industries. It is a full service Design/Build General Contractor specializing in concept to completion of low rise commercial structures, and has completed over 6,500 projects across the Southeast. ABUCK is licensed in Georgia, Alabama, Florida, Louisiana, North Carolina, South Carolina, Tennessee, and Virginia.

CAD Designconcretedesign/buildFeasibility studiesgeneral constructionheavy industrial constructionmaster planningmetal building erectionzoning and permitting

Aerial Precast Concrete & Structural Steel (APC) is a South Florida builder based in Davie, Florida, with over 20 years of experience serving residential, commercial, and industrial clients across southern Florida including Miami, Fort Lauderdale, and West Palm Beach. APC provides precast concrete, structural steel, general contracting, home design and building, and commercial construction services, with an in-house team of designers and engineers supporting projects from design to installation.

commercial constructiondelivery and installationengineering and design servicesgeneral contractinghome designprecast concrete manufacturingresidential construction

Affton Fabricating & Welding Co., Inc. (AFWC) was founded in 1956 by Don Pfeil, Sr. as a small family-operated welding company in south St. Louis and moved to Sauget, Illinois in 1998. It is a full-service structural steel fabricator capable of detailing, fabricating, and erecting a complete range of structural steel projects, operating from a facility of approximately 40,000 sq/ft.

deliverydetailingerectingmiscellaneous fabricationretail steel saleswelding

Agate Steel, Inc. is a structural steel fabricator and erector founded in 1973 and based in Scottsdale, Arizona. It provides AISC-certified structural steel design, fabrication, and erection for sectors including public works, federal projects, manufacturing, industrial, aviation, mining, and infrastructure across the Western United States.

preconstruction servicesproject managementstructural steel designstructural steel erection

Akins Manufacturing Inc. is a commercial welder and structural steel fabricator based in Algodones, New Mexico. It is a member of the American Institute of Steel Construction and an AISC certified fabricator, operating in a 23,000 square foot manufacturing facility. The company provides project management, design engineering, full drawing and documentation packages, and welding and fabrication of all material types, with in-house steel detailing and design using BIM software integrated with CAD/CAM equipment.

BIM softwareCAD/CAMDesign EngineeringFCAW (Flux Cored Arc Welding)GMAW (Gas Metal Arc Welding)GTAW (Gas Tungsten Arc Welding)SMAW (Shielded Metal Arc Welding)steel detailing

American Construction Services, Inc. of Tampa (ACS) is a full-service general commercial and industrial construction contractor founded in 1985 by Mr. Carl Aldridge, Jr. ACS offers nine construction business licenses and serves utility, industrial, in-plant, commercial, municipal and federal customers across the Southeastern US. It is a registered Women-Owned Small Business, currently led by President Carla Boyce.

AST/UST pressure testing and leak detectionClock Spring pipeline repairconcrete workearthmoving and site preparationemergency response servicesHVAC testing and balancingnatural gas pipe welding and fabricationpipeline installation and maintenancepipeline right-of-way maintenanceUST decommissioning and removalwelding

American Steel, Inc. (ASI) is a steel fabrication facility in Billings, Montana catering to small to midsized commercial and industrial projects. ASI operates out of a modern, climate controlled, 27,000 square foot facility with automation and robotics supporting craftspeople who fabricate structural components, ornamental steel, and industrial frames. ASI is an AISC Certified Building Fabricator with Complex Coatings Endorsement.

aluminum weldingBIM modelingCNC tube & plasma cuttingcomplex coatingsdetailing & designestimatingproject managementrobotic weldingSDS2 3D modelingsteel fabrication

Angeles Welding Solutions is a Port Angeles, Washington welding shop owned and operated by Monte Dujue, a certified welder with 20 years of experience. The company provides mobile welding, onsite fabrication and repair, specializing in stainless, aluminum, and steel welding for homeowners, boat owners, automotive and trucking specialists, RV and trailer owners, and equipment repairs, plus custom fabrication and prototype development.

boat repairConstruction Managementcustom metal fabricationjig buildingmechanical assemblymobile weldingpickup and delivery with lift gatepipe weldingprototypingshipbuildingTig weldingwelding

passion for CONSTRUCTION Anvil Steel Engineering consistently aims to improve our craft. Creative design and expert craftsmanship ASE’s unique combination of design, fabrication and construction expertise allows us to consistently exceed clients’ expectations. Our workers make the difference ASE’s master craftsmen are uniformly dedicated to their work. That’s why we never stop improving. GENERAL BUILDING CONSTRUCTION, CONSTRUCTION MANAGEMENT, DEMOLITION, MISC METALS, WELDING, STRUCTURAL, REINFORCING A Range of Services From full service design/build, new construction, renovations and metal work, ASE delivers works that exceeds expectations.Learn MoreOur workers make the difference ASE’s craftsmen are experienced in helping clients comply with specific regulatory requirements.Learn MoreA Range of Services From full service miscellaneous metals, structural steels, new construction.

carpentryConstruction Managementdemolitiondesign/buildgeneral building constructionironworkingroofingwelding

Apache Steel Corp. is a family-owned metal management company providing industrial metal fabrication services to contractors and businesses across the Rocky Mountain Region since 1965. Located in Wheat Ridge, Colorado, it was founded by Ed Geiger and Jim Strutz, and John Geiger became President in 1991. The company offers custom metal fabrication, structural steel fabrication, repair welding, and retail metal sales, with over-the-counter services and on-time delivery.

metal fabricationrepair weldingwelding

Apache Refinery Services, also referenced as Apache Welding, Inc., is an ASME-certified fabricator based in Willis, Texas, operating a 24,000 sq ft shop and serving the Gulf Coast since 2002. The company holds ASME 'U', 'S', 'R' and 'NB' code symbol stamps and provides pressure vessel and piping fabrication, refinery turnarounds, modular refineries, and onshore drilling fabrication and support.

ASME code fabrication (U, S, R, NB stamps)design and engineeringheat exchanger retubing and bundle pullsinstallation and commissioningnozzle repairpipe fabricationpressure vessel fabrication and repairproject management and schedulingwelding

A & P Services LLC is an EDWOSB Certified Company based in Kapolei, Hawaii, providing commercial and industrial welding and ship repair. Founded in 2017 after over 15 years of welding industry experience, the company focuses on personalized service, safety, and integrity.

acetylene torch cuttingbrazingcarbon air arc gougingGMAW weldingindustrial pipe fittingSMAW weldingstructural steel erection

AP Supply and Services, LLC provides a broad range of products and value-added services to customers in maintenance, repair and operations, water infrastructure, and residential and non-residential construction sectors. Its AP Supply Waterworks division distributes water and wastewater transmission products to contractors and municipalities, while AP Supply Construction & Industrial distributes specialized hardware, tools, engineered materials, and safety products.

contractor education seminarsdistributionon-site trainingsrentals (trench boxes, construction equipment, plates)shop drawingssubmittal packagestake-offstechnical assistance and support

Area Iron & Steel Works, Inc. is a steel service and fabrication center serving El Paso and surrounding areas. It opened on April 2, 1990 as a fully stocked hot rolled steel warehouse and is wholly owned and operated by Karen Edmonston. The company is a steel service center, reinforcing and structural steel fabricator, and stocking distributor.

certified weldingcutting material to sizeestimating projects from architectural and engineering plansshop drawingssteel fabricationstocking distribution

Arnold Steel Company, Inc. is an AISC-certified structural steel fabricator and erector based in Howell, NJ, with over 60 years of experience. The company is involved in all facets of structural steel fabrication and erection, offering design build and steel service center services, and sells, fabricates, delivers and erects steel for commercial, corporate, school, hospital and residential projects.

3-D structural design and draftingAutoCADautomated drillingautomated punchingBIMCNC cuttingdesign-buildfield measuringfield surveyingoxy-fuel cuttingplasma cuttingsteel erectionTekla

Red Dog Welding Co. is a veteran-owned and operated steel fabrication company based in Austin, Texas, serving Central Texas including Round Rock, Cedar Park, Georgetown, Dripping Springs, and San Marcos. With 15+ years of experience and 100+ projects completed, they provide structural steel fabrication and erection, architectural and ornamental metalwork, custom railings, metal design and fabrication, and full-service project management. They are HUB certified, fully insured, and compliant with OSHA and AISC standards.

assemblycustom fabricationcuttingdesign-build steel packageserectionfield weldingmetal repairproject managementwelding

Barin Group is an industrial and heavy commercial construction company based in Pocatello, Idaho, serving Idaho, Washington, Oregon, Montana, Wyoming, Utah, Nevada, and Arizona. It delivers self-performed, turnkey multi-trade solutions including electrical, plumbing, mechanical, process piping, structural steel, and general contracting.

boilermaker servicescode weldingelectrical installationgeneral contractinginstrumentation and controlsmechanical installationmillwright servicesoff-site manufacturingplumbingprefabricationprocess piping fabricationriggingstructural steel erection

Blackhorse Industrial Solutions We never stop pursuing and perfecting ways to exceed our clients’ expectations.Blackhorse Industrial Solutions was started to fill a need for safe, experienced technical services within the industrial sector, including electrical, mechanical, process piping, engineering, and controls & automation. CONTACT US “In every project, we found their work to be thorough, precise, and well organized.” — Automobile Manufacturing Customer Blackhorse Keys to Success Experience Our employees can successfully perform operations within a variety of welding processes and many other capabilities. Collaboration Our in-house staff has forged strategic partnerships through years of industrial manufacturing experience. Results We provide clients with turnkey solutions all stakeholders can be proud of. CALL NOW Our Capabilities Blackhorse Industrial Solutions LLC is dedicated.

building automation systemscustom engineeringdata and fiber optic cable installationelectrical installationsequipment maintenancefabricationFCAWGMAWGTAWHVAC controlsLighting Control Systemsprecision machiningprocess pipingSMAWturnkey project managementwelding

Blattner Steel is a structural steel fabricator located in Cape Girardeau, Missouri, providing steel fabrication since 1986. The company offers design-build, detailing, estimating, and fabrication services, specializing in structural steel, metal stairs and rails, and joist and metal decking. It is AISC certified in Structural Steel buildings since 1996 and serves projects within a 500-mile radius.

design-builddetailingestimatingjoist and metal deckingmetal stairs and rails fabrication

Blue Star Welding, LLC is a full-service, large-capacity welding and fabrication company located in Bellingham, WA, serving the Pacific Northwest since 1981. Founded by Frank Priebe, it began as a heavy equipment repair welding company and expanded into line boring, cylinder repair, machining and bucket manufacturing. It offers structural steel fabrication and erection, specialty custom metal fabrication, custom attachments, machine shop and hydraulic cylinder repair, and sandblasting and industrial painting.

aluminum and stainless steel weldingcustom metal fabricationdesign and detailinghydraulic cylinder repairindustrial paintinginstallationline boringmachiningplasma cuttingportable weldingpress brakesandblastingstructural steel erectionwelding

Boise River Fence is a full-service fencing contractor based in Boise, Idaho, providing residential, commercial, and industrial fencing services since 2001. The company operates a full-service metal fabrication and powder coating facility and is one of the largest self-performing fence contractors in Idaho, with dedicated crews for electronic gates and security systems.

fence installationgate installationmetal fabricationpowder coatingself-performing installation

Bolt Construction Inc. is a family owned and operated general contractor headquartered in Youngstown, Ohio, founded in 1981. It performs industrial equipment installation, structural steel fabrication, piping fabrication and piping installation as a general contractor or subcontractor across markets including bulk petroleum storage, chemical plants, paper mills, hydrant fueling systems, and energy. The company is licensed to work in 26 states and recognized by Ohio as a certified Women-Owned Business Enterprise.

bolt torquingconcrete and civil constructionCPM schedulingfield piping installationhydrostatic testingindustrial equipment installationpaintingpiping fabricationsandblastingwelding (SMAW, SAW, GMAW, FCAW)

Borrelli Metal Buildings is a family owned, full-service company specializing in commercial Pre-Engineered Metal Buildings and Metal Panel Systems. Services include design, supply and erection of steel building systems, industrial metal siding, metal roofing, and retrofit roofing systems for the commercial, industrial and institutional sectors. The company employs in-house designers using computer aided drafting, along with architects and structural engineers, and is an Authorized Builder for Ceco Building Systems and Kirby Building Systems.

computer-aided draftingconceptual estimating and budgetingdesign and buildmetal roofingmetal wall panel systemsmiscellaneous metals fabricationretrofit roofingsupply and erection of steel building systems