Revit

AES Group, Inc. is a full service engineering and architecture firm providing Civil/Site, Structural, Mechanical and Electrical Engineering as well as Architecture and Interior Design, plus project management, construction management, and cost estimating. It is a certified Service Disabled Veteran Owned Small Business (SDVOSB) and Women Owned Small Business (WOSB) based in Parker, Colorado, providing services throughout the US since 2002, primarily for federal entities.

architectureAutoCADCivil/Site EngineeringConstruction Managementcost estimatingdesign-buildelectrical engineeringEnergy Modeling and StudiesFacility Master Planninginterior designLEED Building DesignMechanical Engineeringproject managementSeismic analysis and designstructural engineering

Ames & Whitaker is a professional corporation with offices in Southington, CT, practicing architecture. Its predecessor firm was established in Waterbury in 1947 and became a corporate practice in 1970; it became Ames & Whitaker in 1990. The firm is owned and managed by two principals, Roger W. Saulnier, LEED AP and Alan Lagocki, LEED AP, AIA Emeritus, and is licensed as a corporation for the practice of architecture by the Connecticut Department of Consumer Protection (license #11). It is a small business concern specializing in sustainable public and i

architectureAutoCAD draftingBIMenvelope repair designexisting building surveysplanningSketch-UpSustainable Design

Andrews, Hammock & Powell, Inc. (AH&P) is a multi-disciplined mechanical and electrical consulting engineering firm founded in December 1988 in Macon, Georgia. It consists of mechanical and electrical engineers, commissioning agents, construction administrators, and support personnel providing mechanical, electrical, plumbing, fire protection, commissioning, and geothermal design services.

AutoCADcommissioningconstruction administrationgeothermal designHVAC diagnosticsMEP designMicroStationtesting and balancing

Anvil Mechanical Inc. specializes in the design, installation, and maintenance of large-scale HVAC systems in the New York Metropolitan area since 2003. The company serves private and public sector projects including high-rise residential and commercial buildings, hotels, museums, and aviation, transportation, and correctional projects. It is a certified DBE, MBE, and SDVOB, and its workers are enrolled in the SWAC program for clearances to work in secure areas.

AutoCad MEPcommissioningcomputational fluid dynamics air flow analysisDesign Draftingduct sizingheat load calculationsHVAC installationHVAC maintenanceHVAC system designNavisworkspiping layoutplant sizingpre-construction servicesproject management

Ashley & Vance Engineering is a civil and structural engineering firm founded in 2005 by Charles and Truitt. It has grown to 9 locations and 110+ team members, with offices in California, Colorado, Nevada, Oregon, and Ohio. The firm emphasizes practical, smart designs, sustainability, and strong client relationships, and is licensed in 38 states.

adaptive reusecivil engineeringdesigndraftingforensic field investigationshistoric preservationlitigation supportproject managementstormwater/hydraulics coordinationstructural engineeringstructural/envelope evaluations

AST Engineers is a full-service mechanical and electrical engineering consulting firm serving Baton Rouge, Louisiana since 1966. The firm provides MEP engineering services, integrating its plans with new and existing building specifications, and offers construction administration services. Its designs are produced with AutoCAD and Revit software and comply with local codes including applicable ASHRAE Standards.

AutoCADbuilding auditsbuilding automation designconstruction administrationelectrical engineeringfire protection designHVAC designlighting designMechanical EngineeringMEP surveysPlumbing Engineering

B&B Electric is an electrical contractor founded more than four decades ago by Al Blaha and Bob Bergh. It employs over 400 electricians and operates from five locations in Eau Claire, Hudson, Holmen, and Rice Lake, WI, and St. Paul, MN. The company provides design-build electrical services, preventative maintenance, arc flash and IR thermography services, and renewable energy installations.

arc flash analysisAutoCADBIMdesign-buildelectrical designelectric vehicle charging station installationIR thermographyprefabricationpreventative maintenancesolar installation

Bemis Associates, LLC is a WBE certified engineering firm located in Farmington, Connecticut, specializing in engineering design of Electrical, HVAC, Plumbing and Fire Protection systems for buildings. Founded in 1929 by Paul D. Bemis in Hartford, the firm emphasizes close working relationships and personal service to architect/clients, with principals directly involved in every project. The firm is committed to sustainable development and has joined the AIA 2030 Commitment.

AutoCAD 2014Computational Fluid Dynamics (CFD) Analysiselectrical system designEnergy & Building Performance Modelingfire protection designHVAC designplumbing designTrane Trace Ultra load analysis

Blair Remy Architects delivers innovative architectural solutions through design, planning, and project management. The firm has expertise in architecture, interior design, civil engineering, and project management, and is committed to design excellence, customer satisfaction, and responsiveness to complex schedules and budgets. It uses advanced software such as AutoCAD and Revit for building information modeling.

architectureAutoCADbuilding information modelingcivil engineeringinterior designproject managementsketching

Broyles and Associates, P.C. is a full-service structural engineering firm located in Chesapeake, Virginia, founded in 2005. The firm specializes in the design of buildings and other structures, working with architectural groups, contractors, owners, and other engineering companies. It provides field investigation and inspection, structural engineering and design documents, and special inspection and construction administration services.

AutoCADBIMconstruction administrationField investigationHistoric Renovationsinspectionseismic and wind evaluationsshop drawing reviewspecial inspectionsstructural designstructural engineering

Burdette, Koehler, Murphy & Associates (BKM) is a privately held consulting engineering firm founded in Baltimore in 1968. With 58 years of experience, 106 staff, and 43 professional engineers, BKM designs holistic MEP solutions for healthcare, education, government, science and technology, mission-critical, commercial, housing, and senior living projects.

AutoCADcost estimatingelectrical designfire protection designHVAC designMechanical DesignMEP engineeringplumbing designSustainable Design

Carl Daniel Architects (CDA), Incorporated was founded by Carl V. Daniel, Jr., AIA, in 1989 in Houston, Texas, and relocated to El Paso in 1990. The firm provides Architectural and Engineering Services to clients within and beyond the El Paso area and has completed over 400 million dollars in construction projects. CDA has specialized in designs for healthcare, educational, commercial and municipal clients.

architectureAutoCADconstruction documentsinterior designplanning

Cartier Structural Design is a structural engineering consulting firm serving clients throughout New England and New York. It is a woman owned business and a registered WBE. The firm partners with architects, owners, builders, developers and engineers and is experienced in developing structural solutions for new and existing commercial, residential, industrial, and institutional buildings. Founder and Principal Tiffany Cartier, PE holds Professional Engineer licenses in Connecticut, Massachusetts, Rhode Island, Vermont, New Hampshire, and New York.

3D analysisbuilding information modeling (BIM)cloud collaborationcondition assessmentsFeasibility studiesfinite element analysisload rating analysespeer reviewstructural engineering

Dias Engineering is a consulting engineering firm specializing in mechanical, electrical, plumbing, and fire protection lines. The company offers engineering solutions and consulting tailored to each client and site, with offices in New York, NY and Reseda, CA. It is a Minority Business MBE Certified by NYC Small Business Services & NYS Empire State Development and a pre-certified firm with the NYC SCA.

AutoCADcommissioningdesigndraftingEnergy Modelingengineering consultingpeer review

CooverClark is a commercial architectural design firm based in downtown Denver's Lower Downtown Historic District. It specializes in high performance projects nationwide, creating environments where people work, learn and play.

architectural designconstruction documentsinteriorsplanningprogramming

C&P ARCH is a WBENC-certified Women-Owned Business specializing in high-fidelity reality capture, BIM modeling, and VDC coordination for complex buildings and renovations. The firm provides architectural services focused on accurate as-builts, BIM, and VDC coordination, delivering 3D models that are clear, reliable, and built with construction in mind. Its multidisciplinary in-house team includes licensed professionals from architectural and engineering fields.

AutoCADBIM modelingclash detectionGaussian Splatting spatial captureIoT sensor deploymentlaser scanningproject managementquality assuranceScan to BIMsensor and telecommunication system implementationVDC coordination

Crawford Architects is an award-winning international planning, architecture and interior design firm headquartered in Kansas City, Missouri. The firm designs live-work-play developments and specializes in sports and entertainment facilities, higher education, mixed-use, and P3 advisory work. It opened its first US office in Kansas City in 2001 and became employee-owned.

architectureAutoCADbuilding information modeling (BIM)concept designGrasshopperinterior architecturemaster planningP3 AdvisoryRhinosignage & wayfindingSketchUpSustainable DesignUrban Design & PlanningVirtual Immersion

C&T Design and Equipment Company is a full-service foodservice design and equipment supply company founded in 1971 in Indianapolis, Indiana. It offers conception-to-completion services including consulting, design development, engineering, project management, equipment procurement, and installation for commercial kitchens and restaurants throughout the United States and internationally.

AutoCADCommercial kitchen designengineeringequipment procurementfinancingfoodservice consultingfront- and back-of-house designinstallationnational accountsproject management

Culinary Advisors is an award-winning, woman-owned foodservice facility design firm founded in 1993 with clients worldwide. The team has delivered more than 750 food service facility design projects across cultural spaces, convention centers, K-12 schools, higher education, healthcare, historic venues, hospitality, recreational facilities and workplace dining, and is certified in Maryland, Virginia, North Carolina, Pennsylvania and Tennessee.

3D modelingBIMBluebeam project managementcode, health and safety complianceconstruction sequencingcontracting and negotiationDWG automationenergy-efficiency analysisequipment selectionfast-track designFeasibility studiesfoodservice facility designmaster planningoperational efficiency planning

Devcon Construction, Inc. is a veteran-owned general contractor and design-build firm based in Milpitas, California, with a notable regional presence in the West. It has been ranked as the largest general contractor in Silicon Valley for the majority of the past two decades and reports 50 years of business practices. The company serves owners, developers, architects and end users across markets including corporate campuses, educational institutions, housing, civic and sports centers.

BIMdemolitiondesign-buildestimatinggeneral contractingmass timber erectionNavisworkspre-constructionrough carpentrystructural concretesustainability/LEEDtenant improvementwood framing

Domokur & Associates is a full-service architectural practice founded in 1975 as Peterson/Raeder Architects. The firm provides master planning, architecture, interior design, and construction management, with expertise in camps and retreat centers, parks and recreation, corporate offices, and higher education facilities. With more than 45 years of experience, the firm emphasizes listening to clients and creating places with timeless styles and lasting value.

architectureAutoCADBIM modelingConstruction ManagementExisting Conditions SurveysInDesigninterior designmaster planningPhotoshopproject managementStakeholder Engagement and Design CharrettesSustainable Design and LEED Certification

Dulohery Weeks is a professional consulting firm specializing in mechanical and electrical engineering, with extensive experience in government, commercial and institutional markets. Founded in Savannah, Georgia in 1972 as C. J. Dulohery, Jr. P.E., the firm became Dulohery & Weeks, Consulting Engineers, Inc. in 1974 and is now known as Dulohery Weeks. The firm focuses on sustainability and LEED principles in building design.

AutoCADbuilding information modeling (BIM)commissioningelectrical engineeringenergy managementEnergy Modelingfire protection designHVAC designLEED consultingMicroStationplumbing designsustainability consulting

Emotive Architecture is an award-winning architectural design firm in Washington DC, founded in 2011 by Managing Principal Aubrey Grant. The firm provides human-centric commercial and residential design from concept to completion, with a mission of engagement through strong communication, collaboration, and service.

architectural designAutoCADfeasibility assessmentrendering

Ethel Jacobo is an interior design firm specializing in high-end residential, aircraft, and yacht interiors, providing customized design services for high net worth individuals. The company offers space planning, furniture selection and procurement, material knowledge, project management, and design services, and has experience in furniture manufacturing and logistics since 2010.

AutoCADcolor theory and coordinationfurniture manufacturingfurniture selection and procurementlogisticsproject managementsite supervisionSketchUpspace planningSubcontracting