Dimensional calibration

Accurate Instrument Repair, Inc. is a fully accredited calibration lab in Foothill Ranch, California, specializing in the repair and calibration of dimensional, physical, mechanical, and electrical measuring instruments and gauges. The company offers on-site calibration services and free pick-up and delivery within specified areas.

calibrationelectrical calibrationforce measurement calibrationgage block calibrationhumidity calibrationmass calibrationMechanical calibrationon-site calibrationphysical calibrationpipette calibrationpressure gauge calibrationrepairring gage calibrationtemperature calibrationtorque wrench calibrationweight calibration

ACTCO Metrology is a provider of dimensional inspection and calibration services based in Meadville, PA, founded in 1989. Accredited to ISO/IEC 17025 through A2LA, the company offers non-contact video inspection, contact scan probe inspection, dimensional calibration, and GD&T evaluation, with all measurements NIST-traceable. Its team averages 20 years of expertise per technician, and it operates a 3,500-square-foot inspection and calibration facility.

Contact scan probe inspectionFirst Article Inspections (FAIs)GD&T evaluationMulti-sensor CMM measurementNon-contact video inspectionstatistical analysisTouch probe CMM inspection

Alpha Controls & Instrumentation Inc. is a family-owned Canadian company that has supplied industrial instrumentation and precision measurement solutions for over 45 years. It provides ISO/IEC 17025 accredited calibration, validation, equipment rental, repair, and training services across industries including aerospace, automotive, chemical, energy, food and beverage, HVAC, life sciences, manufacturing, and water/wastewater.

chemical calibrationelectrical calibrationequipment rentalFlow calibrationgas calibrationhumidity and dew point calibrationin-house and on-site calibrationinstrument repairISO/IEC 17025 accredited calibrationparticle counter calibrationpressure calibrationsound calibrationtemperature calibrationtrainingvalidation

American Valley Avionics & Calibration is an accredited ISO/IEC 17025:2017 full-service calibration lab located in Jacksonville, Florida, with over 30 years of experience. It provides fast, dependable services using factory/US military trained technicians on a wide variety of test and measurement equipment, serving military and commercial customers. Calibrations are traceable to NIST and other National Laboratories and comply with ANSI/NCSL Z-540-1 quality standards.

electronic and radio frequency calibrationforce and tension calibrationon-site calibrationpressure calibrationtest equipment repairthermodynamic calibration

AppMet, Inc. is a North Charleston, South Carolina based calibration and testing company. Since 1993 it has offered dimensional, physical, mechanical, electrical and electronic calibration services in climate-controlled laboratories as well as on-site calibrations. Its military-trained metrology technicians serve industries such as automotive, aerospace, manufacturing, biotech, high tech, medical and nuclear, with measurements traceable to NIST and other international standards.

climate-controlled laboratorieselectronic and electrical calibrationexpedited calibration serviceISO-9001 and ISO/IEC 17025 calibrationsNIST-traceable measurementson-site calibrationphysical and mechanical calibration

Boise Calibration Service, Inc. is an independent, A2LA Accredited calibration laboratory founded in 1982, serving the Treasure Valley with calibration, repair, and certification of test, measurement, and control instruments. Accredited to ISO/IEC 17025:2017 by A2LA (Cert. 5608.01), with calibrations traceable to NIST or the SI. Members of NCSLI, ASQ, and A2LA.

asset managementcertificationElectrical/RF calibrationinstrument repairMechanical calibrationonsite calibrationOptical/Chemical/Fluid calibrationpick-up and deliveryTemperature/RH calibration

Brechbuhler Scales, Inc. provides industrial scale sales, installation, repair, calibration, and rental services, along with preventative maintenance, throughout Ohio, Pennsylvania, West Virginia, Indiana, Michigan, Illinois, and Kentucky. The company is ISO/IEC 17025 accredited and also offers concrete foundation and site work services for scale installations.

concrete foundation workcustom software developmentelectrical calibrationelectronic repairforce measurement and calibrationlight excavationoptical and video measuringpressure calibrationpreventative maintenancerental scalesscale calibrationscale installationtemperature and humidity calibrationtorque calibrationtraining development

Southwest Calibration Service, Inc. is a Houston-area (Stafford, TX) ISO/IEC 17025-accredited calibration laboratory founded in 1988 and accredited by ANAB since 2007. It provides NIST-traceable calibration and conformity testing for manufacturers in energy, aerospace, pharmaceutical, industrial, and chemical processing industries, plus metrology equipment sales.

electronic calibrationISO/IEC 17025 accredited calibrationmetrology equipment salesNIST-traceable calibrationonsite calibrationphysical calibrationtemperature calibrationthread gage calibration

Calibration Laboratory, LLC (branded Cal Lab) is an ISO/IEC 17025:2017 and ANSI/NCSL Z540.3 accredited laboratory providing expert electronic, dimensional, physical and thermodynamic instrument calibration and repair services both on-site and in-lab. In business since August 2, 1977, it calibrates over 20,000 unique manufacturer and model numbers and serves industries including aerospace, automotive, medical, military, nuclear and pharmaceutical.

10,000 psi hydraulic calibrationsAC current measurements to 30,000 Achemical calibrationDC voltage source to 100,000 VDimensional inspectionelectrical calibrationin-lab calibrationinstrument repairlaser-interferometer measurement to 80 incheson-site calibrationphysical/mechanical calibrationRF/microwave calibrationsteel rules and tape measures to 300 feettemperature generation to -196 °Cthermodynamic calibration

Calibration Specialty, Inc. provides calibration services and describes itself as offering precision measurement. Its calibration offerings include Torque, Force, Pressure, Dimensional, Electronic and Temperature calibration, and it also offers calibrated gauges for sale.

electronic calibrationforce calibrationpressure calibrationtemperature calibrationtorque calibration

Cal Tec Labs is a 25-year family owned ISO/IEC 17025 accredited full service calibration lab based in Pittsburgh, PA. It provides full data certificates of calibration for dimensional, electronic, and process equipment, serving over 2,500 customers across all 50 states, Mexico, Puerto Rico and Canada, including Fortune 500 companies and small machine shops. Services are offered both on-site within a 6-hour radius of Pittsburgh and off-site at its lab.

electronic calibrationISO/IEC 17025 accredited calibrationNIST-traceable certificationoff-site calibrationonline calibration database managementon-site calibrationprocess equipment calibration

Certified Measurements, Inc. (CMI) is a full-service metrology laboratory established in 1981 in Centerville, Georgia. It is an ISO/IEC 17025:2017 accredited laboratory (accredited by A2LA since June 2000) specializing in dimensional, electrical, mechanical, and thermodynamic instrument calibrations, offering traceable in-house and on-site calibration and repair.

calibrationelectronic calibrationin-house calibrationMechanical calibrationon-site calibrationrepairthermodynamic calibration

DynaCal is a commercial calibration laboratory established in August 2002, based in south Texas and serving the Rio Grande Valley and nationwide. It provides onsite, in-house, and mobile calibration services across dimensional, electrical, mechanical, thermodynamic, chemical, and time & frequency disciplines, with NIST-traceable accuracy and support for ISO 9001, ISO 10012, ISO/IEC 17025, AS9100, and ANSI Z540 compliance. It also offers consulting, training, auditing, and proficiency testing support.

Auditingchemical calibrationconsultingelectrical calibrationlaser interferometrymeasurement uncertainty analysisMechanical calibrationmobile calibrationonsite calibrationsurface plate lapping and resurfacingthermodynamic calibrationtime and frequency calibrationtraining

Enviren Calibrations, LLC provides state of the art calibration of test equipment for manufacturers and other companies that require highly accurate readings from their instruments and mechanical devices. Located at 202 State Street, Binghamton, NY, the company offers electronic, dimensional and mechanical calibration services, with calibrations traceable to NIST and other National Laboratories and compliant with ANSI/NCSL Z-540-1, MIL 45662A and ISO/IEC 17025:2017 standards. Calibration is available on-site at customer facilities or in their full servic

calibration lab serviceselectronic calibrationMechanical calibrationon-site calibrationpickup and delivery

ETI Precision provides ISO/IEC 17025 accredited calibration services, equipment sales, and repairs in all 50 states, including on-site calibrations. For more than three decades it has served industries such as construction, energy, engineering, manufacturing, medical, pharmaceuticals, semiconductors, and utilities. It is part of the Accredited Labs family and also builds high-current circuit breaker testers and AC/DC variable power supplies.

electrical calibrationequipment repairforce calibrationhigh-current and high-voltage testingISO/IEC 17025 accredited calibrationon-site calibrationpressure calibrationretrofit servicesRF & microwave calibrationtemperature calibrationtime calibrationtorque calibration

Field Calibrations, Inc. is a Phoenix, Arizona-based calibration asset management and calibration service provider, ISO/IEC 17025:2017 accredited by the International Accreditation Service (IAS certificate CL-112). It manages the full lifecycle of measurement assets, including active status, calibration due dates, overdue notifications, controlled disposition, and certificates, with NIST-traceable measurement across seven disciplines. The company cites integrity and service since 1983 and incorporation in Arizona on January 2, 1991. It is a wholly-owned

calibration asset managementchemical calibrationDC/low frequency electrical calibrationISO/IEC 17025:2017 accredited calibrationMechanical calibrationNIST-traceable calibrationon-site calibrationpressure & vacuum calibrationrecall and overdue notificationsRF/microwave & time/frequency calibrationthermal/environmental calibration

Global Test Supply is a test, measurement and supply company offering test and measurement equipment, lab supplies, and calibration and repair services. Its laboratories specialize in calibration and repair of test, measurement and control instrumentation, with calibrations traceable to NIST standards. It is an Authorized Repair Center for NAVAC and offers services including electrical, temperature, pressure, dimensional, humidity, infrared, photometric, sound, force and gas detector calibration.

calibrationelectrical calibrationforce calibrationgas detector calibrationhumidity calibrationinfrared thermometer calibrationphotometric light meter calibrationpressure calibrationrepairsound level meter calibrationtemperature calibrationwind tunnel air velocity calibration

Great Lakes Jig & Fixture, LLC has been building quality checking fixtures for manufacturers in the automotive, aerospace and medical industries for over twenty five years. The company has departments in Design, Build Room, CNC, and an ISO/IEC 17025:2017 Accredited Metrology Lab. Great Lakes Metrology Lab is accredited in dimensional calibration and inspection and also does part layouts, gauge calibrations, and third party certification.

build roomCNC machiningdesignfixture manufacturinggauge calibrationinspectionmetrology labpart layoutsthird-party certification

Holts Precision, Inc. provides ISO/IEC 17025 accredited calibration services to Connecticut and Massachusetts for more than 60 years, combining local personalized service with the resources of the Accredited Labs national network. Locations include South Windsor, CT, West Bridgewater, MA, and West Springfield, MA.

contract inspectionelectrical calibrationforce calibrationgauge and equipment repairin-lab calibrationISO/IEC 17025 accredited calibrationmass calibrationmobile calibrationon-site calibrationpipette calibrationpressure calibrationtorque calibration

JJ Calibrations is an independent, A2LA Accredited calibration laboratory that has been a worldwide leader in the calibration, repair and certification of Test, Measurement and Control Instruments since 1984. With over 35 years of experience in the instrumentation industry, it offers dimensional, electrical/RF, mechanical, temperature/RH, and optical/chemical/fluid calibration services, plus repair, certification and asset management.

asset managementcertificationElectrical/RF calibrationinstrument repairMechanical calibrationonline asset trackingonsite calibrationOptical/Chemical/Fluid calibrationpick-up and deliveryTemperature/RH calibration