design for manufacturing (DFM)

29Tech is a hands-on manufacturing team providing precision manufacturing for rugged, regulated products. It offers prototyping, design for manufacturing, supply chain management, quality control and low-volume production, scaling from prototypes to runs of up to 10,000 units. The company owns its supply chain, sources and manages every part, and tests each unit with acceptance procedures replicating heat, cold, vibration and power fluctuations.

and Pilot Production Low Volume ManufacturingLow volume manufacturing and pilot productionManufacturing and Assembly Design forManufacturing PrototypeManufacturing quality controlOperations Management Supply ChainPrecision manufacturing for rugged, regulated products.prototype manufacturingPrototyping and Manufacturing ServicesQuality Control ManufacturingServices and capabilitiesSupply chain operations management

Additive at Scale is a multidisciplinary team of engineers, designers, and technicians based in Bryan-College Station, Texas, providing end-to-end engineering and scale-up manufacturing services. Founded in January 2020 as a division of Axle Box Innovations, the company offers additive manufacturing, rapid manufacturing, and design/engineering support to accelerate innovation through advanced rapid manufacturing solutions.

3D Modeling3D simulationsadditive manufacturingbridge toolingcomposite layupDesign for additive manufacturing (DFAM)generative designinjection moldingmechanical and electrical engineeringpolyurethane and silicone castingrapid prototypingtopology optimization

Aeromotive Services Inc. is a wire harness manufacturer established in 1996, specializing in low volume, high mix design, prototyping, and manufacturing of wire harness assemblies and related components. The company serves automotive, commercial, and aviation/aerospace industries, and operates an FAA Certified Repair Station at DeKalb Taylor Municipal Airport. It holds AS9100 certification and offers a wire harness remanufacturing program.

FAA Certified Repair StationFBO servicesmanufacturingMROprototypingremanufacturingwire harness assembly

American Tool and Mold (ATM), located in Clearwater, Florida, is a woman-owned business specializing in precision mold manufacturing and engineering services for the aerospace, medical, consumer products, and electronics industries. ATM is certified to ISO 9001:2015 and ISO 13485:2016 and is an ITAR-registered company.

CADCAMconformal coolingFailure Mode Effect Analysis (FMEA)mold engineeringMold Flow analysismold managementmold manufacturingrapid prototypingtool design

AMtec Industries Inc. is a custom control panel manufacturer located in the San Francisco Bay Area, with 40 years of continuous operation and experience. AMtec designs and builds power control systems, power distribution boxes, machine controls, distributed control systems, process control systems, and more, for a wide variety of industry applications.

3D ModelingBuild VerifiesCNC machiningComponent selectionConfiguration Changescontinuity testingcustom cable assembliesfactory acceptance testingFull Design Servicesin-process inspectionlean manufacturingNPD & Prototypingpower testingPull Testrapid prototypingretrofitsUL508A consultingWire Harness Development

Atlantic Manufacturing Solutions (AMS) is an engineering-led product development consultancy based in Miami, Florida, focused on turning ideas into manufacturable, real-world products. It provides mechanical engineering, industrial design, design for manufacturing (DFM), prototyping, and manufacturing consulting for founders, startups, and established companies, from concept through production.

industrial designinjection molding designinjection mold toolingmachiningMechanical Engineeringmoldingrapid prototypingreverse engineeringsheet metalsimulation & engineering analysissupplier coordination

AVA Labs is a hardware product development firm founded in 2023 by Randy Robert and based in Delaware, Ohio. It helps founders and teams connect mechanical design, electronics, firmware, prototyping, and testing, from first concept through working prototypes and manufacturing preparation.

3D scanningCADElectronics Designembedded firmwareenclosure designmanufacturer coordinationmechanical designPCB designprototypingreverse engineeringsensor integrationtesting and validation

Welcome to Betts Precision Your Reliable Machining Partner Betts Precision delivers complex precision CNC machining and high-tolerance components for leading orthopedic, aerospace, and industrial OEMs. Our commitment to innovation, quality, and Design for Manufacturability (DFM) helps customers move seamlessly from prototype to production with greater speed, efficiency, and confidence. From advanced multi-axis machining, grinding, and EDM to final inspection and clean-room ready delivery, we provide reliable manufacturing solutions built around our customers’ most demanding applications. As your trusted machining partner, we focus on precision, performance, and long-term partnership. Capabilities Precision Grinding CNC Turning CNC Milling Gun Drilling Custom/Specials Secondary Operations Design for Manufacturing Bett’s Precision’s unparalleled engineering team is unique to the industry.

5-axis grinding5-axis machiningassemblyClean-room ready deliveryCNC millingCNC turningEDMEpoxy ink markingfinal inspectionGun DrillingLaser and TIG weldinglaser markingNitric and citric passivationpackagingprecision grindingultrasonic cleaning

Cases By Source designs, engineers and manufactures custom protective cases and packaging for industries including aerospace, broadcast, consumer products, medical, military, and OEM/industrial. Established in 1985, the company is headquartered in Mahwah, New Jersey, and offers turnkey service from concept to delivery, including Berry compliant manufacturing.

3D renderingsBerry Compliant manufacturingCAD printscontract manufacturingcustom case designdrop testingengineeringEnvironmental testingfoam insert fabricationmanufacturingprototypingvibration testing

Cerion Nanomaterials – Custom Nanomaterials for Industrycerion-admin2024-04-11T12:07:23-04:00 Precisely Engineered Inorganic NanoparticlesJust as your products are precisely engineered and fit for purpose – your nanomaterial must be too. Controlling nanoparticle size and other technical attributes to meet your product goals is our specialty. View Materials Loading... Nanomaterial Design, Scale-Up and Manufacturing Developing in-house nanomaterial expertise is expensive and time-intensive, that shouldn’t stop you from using them to advance your products. Our team acts as an extension of your development team, following your lead to ensure fit and scalability for commercialization. Precisely Engineered Inorganic Nanoparticles Just as your products are precisely engineered and fit for purpose – your nanomaterial must be too. Controlling nanoparticle size and other technical attributes to.

characterizationcreating stable high concentration dispersionsLean Six Sigma manufacturingmanufacturingnanoparticle designScale up

CNC Solutions was established in 2001 to manufacture miniature parts used in the repair and reassembly of medical equipment. This was an effort to eliminate a bottleneck in the acquisition of endoscopy replacement parts. Our unique methods of upfront engineering practices provide us with the ability to replicate a manufacturing process with the exact same level of quality repeatedly and consistently without waiver or compromise. Our customers are most pleased with the CNC Solutions approach to repeatability. We are a full service design and manufacturing facility equipped with state of the art CNC machine tools and CAD/CAM software. This enables us to produce complex designed components and provide parts in a wide variety of materials and configurations, within a timely and cost effective fashion. Utilizing blueprints, solid CAD models provided by customers, reverse engineer from.

3D solid modelingCAD/CAMCNC machiningcontract manufacturingcustom tool and fixture designEngineering ServicesGD&T blueprint creationreverse engineering

Coastal Machine & Supply is a precision machining manufacturer located in Carencro, Louisiana, serving oil and gas, space, aerospace, and defense industries for more than 20 years. The company produces complex, tight-tolerance components and assemblies, with AS9100, ISO 9001:2015, ITAR registration, and CMMC Level 2 compliance.

assemblyCNC machiningCNC millingCNC turningmulti-axis machiningprecision inspectionVertical turning

Cobra Design & Engineering, Inc. is a Woman-Owned Small Business established June 20, 2000, specializing in mechanical engineering, printed circuit design, reverse engineering and turnkey fabrication and assembly for military and commercial industries. The team specializes in electronics packaging design balancing weight, thermal performance, structural integrity and manufacturability.

assemblydynamic analysiselectronics packagingEMI/RFI isolationflex circuit designgasketinginjection mold part designinjection mold tool designinjection mold tool manufacturingmachiningmechanical designprinted circuit designrapid prototypingreverse engineeringstructural analysisthermal analysisturnkey fabrication

Component Engineers Inc. (CEI) provides precision manufacturing for complex parts and components requiring uncommon accuracy and reliability. With more than 40 years of experience, CEI offers one-stop precision manufacturing from design to delivery, serving OEMs in medical, aerospace, defense, energy, firearms, automotive, industrial, consumer, and electronics industries.

CNC Milling & Turningengineering and product developmentheat treatingmetal stampingprecision stampingprototypingResistance spot weldingSwiss machiningtool and die makingtube fabricationwire EDM

ComSonics of Massachusetts Inc, doing business as SHINE, is a custom cable assembly manufacturer located in Adams, Massachusetts. Since 1984, SHINE has specialized in cable assemblies, wire harnessing, and electro-mechanical assemblies, offering engineering resources, account management, and an approved global supply chain. The company holds ISO:9001:2015 and IPC620 certifications with TUV Rhineland of North America.

box buildcordsetscustom cable assemblyelectro-mechanical assemblyengineering supportlead wire assemblyNew product introduction (NPI)prototyping to productionsourcing and inventory managementtestingwire and cable processingwire harnessing

Credo Product Development is a product development consultancy specializing in industrial design, mechanical engineering, electrical engineering, software engineering, design research, and prototyping. They design products for clients ranging from startups to large corporations, aiding in the development of consumer products, medical devices, scientific instruments, and digital interfaces.

3D printingCADdesign researchElectrical EngineeringFEA/CFD simulationsindustrial designMechanical EngineeringPCB layoutprototypingsoftware engineeringTest fixture designUI/UX design

DE Design Works is a US-based electronics engineering and product design firm that provides custom PCB hardware design, software and firmware development, and IoT/connected-device engineering for complex, mission-critical products. Its senior engineers support industrial, medical, and military electronics programs from concept through production, including prototyping, testing, and transfer to production. The company has been doing advanced PCB design since 2002.

certification supportembedded software developmentenvironmental and humidity testingfirmware developmentGUI/UX designhigh-power testing up to 3 kWindustrial designIoT engineeringPCBA prototypingPCB designPCB layoutprototypingSystems Integrationtesting

DEM Manufacturing is a U.S.-based, vertically integrated electronics design and manufacturing partner founded in 1993. It provides turnkey product development from concept to commercialization, including design, engineering, prototyping, and production, serving defense, medical, first-responder, law enforcement, maritime, and industrial markets with rugged, high-performance products.

3D printing and prototypingCAD modelingcustom cabling and connectorsfirmware integrationfunctional circuit testinginjection moldingIP ingress and waterproof testingmechanical and electrical engineering designMIL-STD-810 testingPCB assemblyproduct validation testingtooling design and fabrication

FEMTOPRINT is a Swiss high-tech provider specializing in high-precision 3D glass micro-fabrication using ultrafast femtosecond laser processing and Selective Laser Etching (SLE). Founded as a spin-off from the European FEMTOPRINT project, it offers contract development, rapid prototyping, and contract manufacturing services, serving industries including medtech, biotech, optics, photonics, quantum, semiconductors, aerospace, AR & VR, energy, and watchmaking. The company is ISO 13485:2016 and ISO 9001:2015 certified, headquartered in Agno-Lugano, Switzerl

3D glass micro-fabricationcontract manufacturingfemtosecond laser processinghermetic sealingmetallizationmicrofabricationoptical coatingprecision engineeringrapid prototypingSelective Laser Etching (SLE)ultrafast laser processingwafer level manufacturing

of pageYour Concierge Engineering, Prototyping, and Product Development Partner From Concept to LaunchSimplifying Complex Product Development With Personalized Engineering ExpertiseStart a Project Services Forward Engineering, LLC provides mechanical engineering services, product development services, mechanical design, prototype development, fixture design, reverse engineering, manufacturing support, and engineering consulting for clients throughout Southern California, including Los Angeles, Orange County, Inland Empire, and across the United States.Reverse Engineering & Legacy SupportCustom Equipment and Fixture DesignProduct Development & Mechanical DesignCommon Challenges We Solve​​ Product designs that are stalled Manufacturing cost reduction initiatives Legacy equipment with missing CAD files Obsolete components requiring reverse engineering Custom equipment and fixture design.

3D CAD modeling (SolidWorks)BOM developmentDesign for Assembly (DFA)design reviewsengineering consultingfixture designmanufacturing drawings with GD&T per ASME Y14.5mechanical system designproduct architectureprototype fabricationreverse engineeringtestingvalue engineering

Foxtrot Research Corp is a small business based in Tampa, Florida providing engineering and manufacturing services spanning from component development and fabrication to system integration and testing. The company aims to minimize the timeline between concept development and fielding without sacrificing quality, and its engineers are cleared at the Secret or Top Secret level.

antenna designcircuit board assemblyCircuit Design & LayoutComputer EngineeringElectrical EngineeringMechanical EngineeringPCB assemblyProduct Sustainmentprototype developmentRF/Antenna Engineeringsoftware designsUAS/UAV Payload Integrationsystem engineeringThermal & Structural Analysis

Hibbing Fabricators, Inc. is a manufacturer of precision sheet metal and machined components and assembled products, founded in 1985. From prototypes through production runs, they manufacture precision metal parts, components, and assemblies for the Aerospace, Medical, Telecommunications, Industrial, Technical, and Electronics industries. They offer design assistance and work closely with customers to ensure design for manufacturing (DFM) is optimal. The company is ISO9001:2015 and AS9100D certified.

assemblydesign assistanceJIT deliveriesKanban systemslaser cuttingmachiningmanaged inventorymetal fabricationwelding