custom engineering

Envirosystems Manufacturing, LLC manufactures Airwall® industrial dust collectors and air filtration systems, abrasive blasting and surface preparation equipment, and environmental control booths. Based in Tucson, AZ, the company has served industrial dust collection, surface treating, mining, and underground tunnel industries since 1987, with an international customer base and 14 US and foreign patents and 15 trademarks.

abrasive blastingair filtrationcoating removaldust collectioninstallation servicesmanufacturingsurface preparation

Epiphene Incorporated, based in Clovis, California, engineers custom water filtration and liquid filtration solutions down to 1/2-micron, chemical-free filtration. The company serves data centers, HVAC and cooling, irrigation, recycled water, industrial processing, and RO/desalination applications, protecting pumps, valves, exchangers, and membranes from silt and abrasive solids.

1/2-micron filtrationfiltration system designon-site commissioningplug-and-play skid deploymentsilt separation

ETECH CONTROLS CORPORATION manufactures Secure-Tech modular electronic communication and control system products for modern justice and correctional facilities. Over one-hundred modular electronic function products and end-of-line communication devices integrate control, monitoring, and communication systems. The product line has served detention electronics needs for over thirty-five years, with history dating to 1972.

factory testingmanufacturingopto-isolation to 7500 voltsplug connectionstechnical supporttraining school classes

U.S.-based battery engineering company specializing in modular lithium-ion battery systems for aerospace, defense, and industrial applications

battery pack designBMS integrationCAN 2.0B / J1939 interfacesmodule assemblythermal management (air or liquid)ultrasonic wire bonding

Executive Elevator is a fabricator, designer, and installer of commercial and residential elevators serving Kentucky and Indiana. The Irvin family has been in the elevator industry since 1965, and the team has more than six decades of experience in vertical transportation. The company provides elevator installation, service, and repair, including custom engineering and redesign of existing systems, with offices in Louisville, KY and Indianapolis, IN.

designelevator installationelevator service and repairelevator upgradesfabricationmaintenance agreements

Factory Supply supplies standard and custom safety solutions throughout the United States, including rooftop fall protection, industrial material handling, aviation maintenance stands, and netting systems. The company designs, engineers, fabricates, and installs access products and material handling equipment for businesses in North America, serving industries such as roofing, general construction, manufacturing, military, aviation, and aerospace.

designengineeringfabricationinstallationproject management

FiberTech Optica is a leader in the design and manufacture of specialty fiber optic solutions for applications including spectroscopy, process control & remote sensing, illumination, LIDAR, biomedical & general research and instrumentation. The company designs, manufactures, and integrates components and sub-systems to meet customer specifications, offering both standard and custom products and partnering with customers from concept and prototyping through qualification, production, and scale-up.

designintegration of components and sub-systemsmanufactureoptical integrationprecision assemblyprototypingvolume manufacturing

Fleming Steel Company, located in New Castle, Pennsylvania, has been manufacturing custom designed doors since 1921 and is in its third generation of family ownership. It provides custom engineered doors for aircraft hangars, space, military, and special large door applications, offering design, manufacturing, and installation.

designin-house USA fabricationinstallationmanufacturingpreventative maintenance

FlexDecks is a pioneer in designing and manufacturing innovative modular platforms, ramps, and stairs for military and commercial applications. For more than 30 years, the company has provided engineered maintenance stands and fall protection equipment worldwide, with in-house design, engineering, and manufacturing capabilities.

consultation & designdesignengineeringinspectionsinstallationmanufacturing

Flexfab designs and manufactures high-performance silicone hoses, tubing, and ducting for OEM and aftermarket applications across heavy duty truck, aerospace, automotive, rail, and industrial markets. Their silicone solutions are engineered for extreme temperature resistance from -65°F up to 500°F and last 3-5x longer than standard rubber hoses. Flexfab has 30+ years of experience and 500+ distributor partners across North America.

OEM designreinforced hose productionsilicone hose manufacturing

ForeverPure Corporation is a B2B manufacturer founded in 1997 and headquartered in Santa Clara, California, that designs, manufactures, and installs custom turnkey water purification, seawater and brackish water desalination, solar-powered water, and industrial energy storage systems. It reports 8,000+ systems deployed in 40+ countries across six continents, serving municipalities, industrial facilities, and engineering firms.

24/7 remote monitoringcommissioningcontainerized/skid-mounted deploymentenergy recovery integrationfactory testinginstallationmanufacturingoperator trainingsystem design

Forge Heavy Industries is a specialized engineering and manufacturing company focused on delivering reliable ground support solutions for the aviation industry. It designs, builds, and services high-performance power and environmental systems that keep aircraft operational while on the ground, serving aviation, defense, and industrial operations with custom electronics and legacy support.

controls and integrationdepot or field level servicemaintenancemanufacturingmechanical, electrical, software and manufacturing engineeringpower systems engineering

Foss Therapy Services Inc. (FTI) provides irradiator and radiation device services, including manufacturing, servicing, decommissioning, and custom engineering of gamma irradiation systems. The company designs and manufactures self-contained and open beam irradiators, offers refurbished units, replacement Co-60 and Cs-137 sources, calibration and dose mapping, relocation, and turn-key disposal of radioactive sources.

calibrationdecommissioningdisposaldose mappingmanufacturingrefurbishmentrelocationrepairservicingsource reloading

Fox Valve is a privately-owned small business founded in 1961 that designs and manufactures engineered venturi products under the brand Fox Venturi Products, serving industrial and aerospace applications. Products are engineered and manufactured in the USA, with venturies under a five-inch line size made at its Dover, New Jersey facility. The company originated in the 1960s designing flight-qualified venturi hardware for spacecraft.

CNC lathesintegration with pneumatic conveying, steam jet vacuum, and slurry systemsmanufacturingprototype developmentquality assurance/inspection/testingsolids conveying test lab

Flow Technology, part of the AMETEK LMS Business Unit, is a flow meter manufacturer with over 50 years of experience providing specialized, high accuracy flow meters and flow metering solutions. Its turbine, positive displacement, electromagnetic, and ultrasonic flow meters are used in liquid and gas flow sensing applications across aerospace, automotive, industrial, oil & gas, and steel industries. The company also offers calibration and repair services and custom flow measurement solutions.

calibrationcustom circuitryflow meter manufacturingqualification testingrepairs

Advanced gimbal arrangement for Pratt & Whitney's Joint Strike Fighter engine test facility.Dismantling expansion joints – Ras Laffan, the world's largest common cooling water facility.Manufacturing capabilities from 1”–144”. “From the simple to the simply amazing.”In-line Pressure Balanced arrangement installation at Vogtle (Units 3,4) Nuclear Generating Station.General Rubber proudly boasts field services and inspection capabilities.72” 9500-XL pinch and check valves for massive stormwater infrastructure project.

burst testingCAD and simulationcycle life and fatigue testingexpansion joint manufacturingfield services and plant inspectionshydrostatic testingmaterial testingnondestructive evaluation (NDE)spring rate testingvacuum testing

Geophysical Supply Company (Geosco) is a family-owned stocking distributor based in Houston, TX, serving industrial markets worldwide since 1937. It distributes wires, cables, connectors, and related electrical products, and builds custom cable assemblies and kits to customer specifications. The company operates a warehouse of over 20,000 square feet with an electronics assembly area and chemical storage room.

cable assemblykit buildinglaser engravingonsite consultationsquality assurance/QC programsVendor Managed Inventory

Items Custom Engineering Automation Distribution Learn More Motion Control Quality Motion Hardware for Your Application Learn More Specialists in Automation and Motion Programming Learn More Custom Engineering and Turnkey Systems Learn More Have an application in mind? Give us a call or send us an email to discuss your needs. G&G Technical: Experts in the Field G&G Technical carries a full line of the industry’s leading automation and motion control products to suit nearly any application. Originally the distribution arm of the Tyler Griffin Company, we evolved to become much more than a distributor: G&G Technical is the perfect complement for your design and engineering team with our decades of experience in the motion control and system design fields. We focus on tailor-made solutions to fit your unique specifications. Whether you need a specific component, a helping hand in sizing.

CE and power quality testingcustom printed circuit board design and buildmachine safety seminarsmotion, PLC & HMI programmingretrofittingsizing & selectionsystem integrationUL 508A panel design, assembly and testing

Givens Lifting Systems Inc. designs and manufactures lifting equipment and material-handling machines in the USA, including lightweight bridge and jib cranes, multi-ton bridge cranes, torque arms, industrial manipulators, and automated material-handling machines. The company has been designing and manufacturing material-handling equipment since 1993, with in-house fabrication and assembly performed by mechanical engineers, designers, machinists, millwrights, and quality control specialists.

assemblycontrolsin-house fabricationmachiningwelding

Goodway Technologies engineers and manufactures industrial cleaning and maintenance equipment for HVAC, manufacturing, food and beverage production, power generation, maritime, and facility maintenance. Incorporated in 1966, the company manufactures and ships from a 60,000 square foot plant in Stamford, CT, USA, and is ISO 9001:2015 certified. Products are sold direct and through a global distributor network.

manufacturingon-site serviceproduct support

Greenerd Press & Machine Company, founded in New England in 1883, designs and builds custom and standard hydraulic presses in all sizes and configurations. Starting with precision arbor presses in 1883 and building its first hydraulic press in 1934, the company serves demanding pressing applications in aerospace, defense, and manufacturing. Located in Nashua, New Hampshire, Greenerd also provides rebuilds, installation and training, and technical support and maintenance.

hydraulic and electrical upgradeshydraulic press manufacturinginstallation and trainingon-site field servicepreventative maintenanceremote technical supportretrofits and rebuilds

Greene Tweed develops advanced sealing solutions, electrical and fiber optic connectors, structural components, and engineered materials for demanding applications across industries including aerospace, chemical processing, energy, defense, semiconductor, space, life sciences, and hydrogen.

connector designmanufacturingsealing solutions

Grimco Hydraulic Presses designs and builds complete hydraulic presses from design, assembly, programming and testing, with presses ranging from 10 to 1000 tons. Presses can be built in compression, transfer, vacuum, and laminating configurations, standard or custom to customer specifications. The company operates a 14,000 square foot facility in Paterson, New Jersey, and has served the industry for more than half a century.

assemblyCAD/CAM customizationpress designprogrammingtesting

Guyson Corporation of USA designs and manufactures automated and robotic shot peening, abrasive blasting, washing, and surface finishing systems. The company builds manual, automated, and robotic finishing equipment including dry blast, air-blast automatics, wheel-blast systems, manual blast cabinets, and dust collectors, and serves industries such as aerospace, automotive, medical, firearms, molds and dies, tire, and additive/3D finishing. Guyson also offers contract finishing, process development, consultation, machine parts, blast media, and field ser

air blastingautomation systemsclosed-loop process monitoringcomponent manipulationcontract finishingdry-blastingnozzle manipulationprocess developmentrobotic blastingshot peeningvision systemswet-blastingwheel blasting