coating inspection

The Beta Group (TBG) is an engineering and construction services firm established in 1997 by Murray White and John Laughlin. It specializes in geotechnical and forensic engineering, construction materials testing, construction project management and light construction activities, with offices in Gretna and Chalmette, Louisiana, serving Louisiana and Mississippi. TBG has completed over 6,000 projects and is a recognized DBE firm and SBA 8(a) program graduate.

asphalt mix design reviewconcrete mix design reviewconstruction materials testingforensic engineeringgeotechnical engineeringGround Penetrating Radarnon-destructive testingpile load testingsoil and aggregate laboratory testingvibration monitoringweld and steel inspection

Certerra provides technology-enabled testing, inspection, and certification services to assure quality and advance innovation in critical infrastructure. Its network of offices and laboratory facilities pairs local expertise with specialized capabilities and national scale, with 2000+ employees and 70+ nationwide locations. Certerra was built by bringing together regional businesses into a national materials engineering and earth sciences platform.

certificationearthquake engineeringgeotechnical engineeringinspectioninstrumentation and monitoringlaboratory testingMaterials testingsubsurface imagingunderground utility locating

BN Inspection, based in Creve Coeur, Missouri, is a CVE Certified Service Disabled Veteran Owned Small Business (SDVOSB) providing consulting and inspection services for protective coatings and Certified Weld Inspections (CWI). It is an AMPP QP-5 Certified Inspection Firm with over 150 years of combined ownership and management industry experience, serving state governmental entities and private businesses.

adhesion testingasset evaluationCertified Weld Inspections (CWI)corrosion consultingfailure analysisProject ManagementRemote Operated Vehicles (ROVs)specification writing

C&L is a customer-centric firm proudly serving the energy industry since 2013. It provides competent, conscientious, and experienced personnel to clients based on their needs, tailoring services to client requirements, placing the right people, and providing insightful recommendations to enable strategic operational improvements.

As-Built InspectionCost ControlFabrication Inspectionfiber optic splicingProject & Construction ManagementQA/QCsafety inspectionschedulingthird-party inspection

CME is a Northern Nevada engineering firm providing inspection services, materials testing, geotechnical engineering, and construction administration. Founded in 1978, it has grown into a multidisciplinary team of over 100 employees and operates one of the largest AASHTO-accredited materials testing laboratories in the region, serving public and private sector projects.

aggregate qualification testingconcrete mix designConstruction Administrationcost estimatinggeotechnical engineeringinspection servicesMaterials testingnon destructive examinationwelding inspection

Contracting & Materials, Inc. is a general contractor established in 2001 in Decatur, Alabama, specializing in industrial painting, vessel linings, HVAC equipment coatings, containment area coatings, floor coatings, waterproofing, polyurea and Belzona repairs. It serves chemical, paper, commercial, government, power, water treatment, food, manufacturing, oil and gas industries throughout the Southeast, Gulf of Mexico and Texas.

abrasive blastingASME engineered certified repairsBelzona coating applicationcomposite wrapscorrosion surveysdust-free abrasive water blastingfloor coatinghigh-pressure water jettingindustrial paintingleak sealingProject Managementsponge blastingspray polyurea

Crosno Construction is a tank construction services company founded in February 2004, based in Arroyo Grande, California. It provides complete engineering, shop fabrication, shop blast and prime, site development, field tank erection, field tank blasting and coating, and disinfection for AWWA D100 potable water tanks and API 650 oil tanks. The company self-performs all work including shop fabrication, shop painting, field erection, field coatings and site development.

concrete workdisinfectionearthworkengineeringfield blasting and coatingfield tank erectionmechanical workpipingseismic upgradesshop blast and primeShop fabricationwelding inspection

DACCO SCI, INC. is a corrosion engineering, materials technology, and electrochemistry firm founded in 1988 by Dr. Chester M. Dacres and incorporated in Columbia, Maryland in 1989. It bridges laboratory research and practical field implementation, providing corrosion protection solutions for critical infrastructure nationwide, including cathodic protection system design, field and laboratory testing, and forensic failure analysis.

cathodic protection system designelectrochemical impedance spectroscopyfailure analysisfield testingGIS asset managemention chromatographylaboratory testingmagnetic particle testingmetallurgical analysisnondestructive testingpotentiodynamic/cyclic polarization scansultrasonic thickness measurementweld inspection

Dunham Engineering specializes in storage tank inspection and design, corrosion engineering, water and wastewater facility support, and fuel and chemical tank services. Originating in Texas and serving across the Gulf of America since its founding in 1992, its combination of engineers and inspectors supports projects from concept through startup, ensuring regulatory compliance, structural integrity, and long-term value.

adhesion testing per ASTM D3359ASME pressure tank engineeringcoating and lining inspectioncorrosion engineeringfinite element analysis (FEA)pull-off testing per ASTM D4541storage tank design and rehabilitationwelding inspection

Elite 360 Construction Services is an industrial provider of soft craft services, coating, scaffold, insulation and technical services based in Kinder, Louisiana. The company offers historic preservation, commercial and industrial roofing, protective coatings application and maintenance, scaffolding, insulation, coating inspection and water tower rehabilitation, and maintains a 'No Shortcuts in Safety' policy with a zero TRIR rating.

historic restorationinsulationmasonry and window restorationmural replicationpressure washingprotective coatings applicationroofingscaffoldingsurface preparation

Fleet Robotics provides submersible, autonomous hull-cleaning and inspection robots for shipping and maritime vessels. Its onboard autonomous mobile robots perform biofouling mitigation, dry bulk cleaning, and hull inspection without supervision or port visits, while continuously gathering data points and assessing coating integrity to provide insights into submerged surfaces and infrastructure.

autonomous hull cleaningbiofouling mitigationData Collectiondry bulk cleaninghull inspectionsteel inspectionvisual inspection

Fleming & Associates, PA is a structural engineering and building enclosure firm founded in 1987 by Stephen Fleming, PE, RBEC, and headquartered in Fayetteville, North Carolina. The firm serves most of the Southeastern United States, offering structural engineering, building enclosure services, special inspections, and forensic engineering. Its building enclosure department specializes in roof assessments and replacement design, exterior wall and window consultation, and exterior waterproofing consultation.

building enclosure designConstruction Administrationforensic engineeringroof assessmentsite observationspecial inspectionsstructural engineering

FourBridge Solutions partners with municipalities to extend the life, safety, and performance of critical infrastructure. It specializes in coating and corrosion inspection and water/wastewater facility operations, using drone and ROV inspection systems for data-driven assessments. Its team includes AMPP-certified Level 2 & 3 Coating Inspectors and Protective Coating Specialists through SSPC.

corrosion inspectiondrone inspectionplanned maintenance programsprotective coatingsROV inspectionwater and wastewater facility operations

Fuchs Consulting, Inc. (FCI) specializes in development of systems and instrumentation for nondestructive evaluation (NDE) and assessment of highway bridge structures and for military applications. Systems and techniques developed by FCI include innovative tools to improve steel bridge manufacturing, to inspect coating systems, to better detect internal damage in concrete, and other applications related to civil infrastructure.

bridge deck and soffit inspectionbridge metrologyinfrared thermographyinspection planninglong-term monitoring systemsnondestructive evaluation (NDE)steel bridge fabricationthermal stress measurement

Fulkrum is a leading inspection, expediting, auditing and technical staffing service provider. As a trusted partner, it enhances the quality and safety of clients' projects, safeguarding operations and budgets while improving environmental performance. Its team ensures operational excellence across multiple sectors in more than 66 countries, serving industries such as oil & gas, renewables, power and petrochemical.

AI detectionAsset IntegrityauditingElectrical & instrumentation testingexpeditingFactory acceptance tests (FAT)NDTRBItechnical staffingVendor InspectionWelding/mechanical testing