CAD

AVA Labs is a hardware product development firm founded in 2023 by Randy Robert and based in Delaware, Ohio. It helps founders and teams connect mechanical design, electronics, firmware, prototyping, and testing, from first concept through working prototypes and manufacturing preparation.

3D scanningDesign for Manufacturing (DFM)electronics designembedded firmwareenclosure designmanufacturer coordinationMechanical DesignPCB DesignprototypingReverse Engineeringsensor integrationtesting and validation

Aviation Repair Resources (ARR) is an FAA/EASA certified Part 145 Repair Station based in Alvarado, Texas, founded in 2009. It provides in-house repair development and manufacturing for airframe components, serving regional airline platforms including Saab 340, ATR 42 & 72, Beechcraft 1900 C & D, Embraer 135 & 145, Canadair CRJ, and De Havilland Dash 8.

CAMCNC Machiningcomposite repairEngineering and designmetal-to-honeycomb bondingmetal to metal bondingmillingparts fabricationrepair developmentsheet metal repairsolid laminate structuressurface grindingtooling fabricationturningwelding

Barnes & Dodge is a mechanical and sheet metal construction contractor that has been building the Midwest since 1963. The company provides pre-construction estimating, design build, and construction services, with project managers experienced in CAD and BIM and trained in the trades. It operates its own full duct fabrication shop and offers prefabrication for projects.

BIMdesign-buildduct fabricationestimatinglaser scanningplasma cuttingprefabricationproject managementspiral ductworkwelding

Baughn Engineering, Inc. specializes in standard and custom vibration and shock test fixtures, with over 50 years of fixture design and manufacturing experience. The company is a direct OEM supplier to major electrodynamic and hydraulic shaker manufacturers worldwide and serves aerospace, automotive, electronics, and commercial customers. In-house capabilities include CAD and finite element analysis (FEA), and modal analysis is also available.

custom fixture designfinite element analysismagnesium weldingmanufacturingModal Analysis

biodesigns, inc. is a full-service prosthetic clinic and R&D lab in Westlake Village, CA, treating upper and lower limb prosthetic wearers worldwide using its proprietary HiFi Interface and HiFi Imager systems. Led by CEO and Chief Prosthetist Randall Alley, it also offers consulting in prosthetics, orthotics, exoskeletons and robotics, education and training for prosthetists, and expert witness services.

3d Printing3D scanningclinical consultingexpert witness testimonyoutcome measuringproduct testingprosthetic clinicR&D labtraining and education

BISH Enterprises, LLC is a consulting firm that consults with clients to implement customized solutions based on needs analysis from onsite consultation. It provides consulting services across AEC, construction, and mechanical disciplines, including workflow automation, programming, Building Information Modeling, content creation, software implementations, support and training, 4D simulations, quantity takeoffs, 3D parametric modeling, design and drafting, and building coordination.

3D parametric modeling4D simulationsAutoCAD APIAutoCAD Map APIAutodesk 3ds Max renderingsbuilding coordinationbuilding information modelingconsultingContent Creationcoordination reviewdesign and draftingOracle Db automationprogrammingquantity takeoffsRevit API automationsoftware implementationssupport and trainingVirtual Design and Constructionworkflow automation

Borup Solutions LLC, based in Rochester, MN, provides end-to-end project support in experimental fluid mechanics, with over 10 years of experience. Services include project planning and specifications, flow model and flow loop design, data collection and processing, and analysis and reporting. The company offers Volumetric Flow Quantification via Magnetic Resonance (VFQ-MR), acquiring data on a fully 3D grid without optical access, with typical uncertainties below 3% and turnaround times of 2-4 weeks.

analysis and reportingdata collection and processingexperimental fluid mechanicsflow model and flow loop designVolumetric Flow Quantification via Magnetic Resonance (VFQ-MR)

Design ● Utility Construction ● Low Voltage Systems ● Design Build Solutions Concept to Connection Watch Our Crews At Work Visit our You Tube Channel WHAT WE DOBPG SERVICES DESIGN & ENGINEERING Our Design team provides Outside Plant (OSP) and Inside Plant (ISP) engineering services. We specialize in GIS/Mapping, Survey, Design, CAD, and consulting services.Our customers consist of CLEC’s, cable providers, government agencies, dark fiber networks, and many others. UTILITY CONSTRUCTION Our Construction team provides Outside Plant (OSP) and Inside Plant (ISP) construction services. We specialize in Horizontal Directional Drilling (HDD), Excavation, and Fiber Placement.BPG believes in a comprehensive pre-planning approach to every project before the start of construction. LOW VOLTAGE SYSTEMS Our Technologies team specializes in the design and installation of communication infrastructure.

design-buildexcavationfiber optic splicing and testingfiber placementGIS/mappingHorizontal Directional Drilling (HDD)hydrovacmobile LiDARplowingpotholingproject managementrestorationsurveytrenchingUAV/drone mapping

Breedlove, Dennis & Associates, Inc. (BDA) is a professional environmental and natural resources consulting firm founded in 1976. BDA provides environmental consulting services emphasizing regulatory compliance with federal, state, and local environmental regulations, and its scientists are qualified as expert witnesses in federal and state litigation.

drone surveysEnvironmental ConsultingEnvironmental impact assessmentsEnvironmental permittingexpert witness testimonyGIS mappingGPSHabitat evaluation and restorationmitigation planningwater quality monitoringwetland delineation

Buffers USA is a supplier of parts and components for shipping containers, chassis, trailers and port equipment, serving marine, intermodal, rail and military applications. Established in 1989 by John Hove in Jacksonville, Florida, the company operates four Product Distribution Centers across the United States and distributes parts globally. It offers cargo control and securement products, chassis, trailer and container parts, lashing and port equipment, rail car securement, and OEM supply and support.

3d Printingaftermarket supplyengineering and prototypingglobal supply chain distributiongovernment contract supportinspectionOEM supplyproduct developmentquality controltesting

Building Momentum (branded BuildMo) is a Service-Disabled Veteran-Owned Small Business founded in 2015 in Alexandria, Virginia. It designs and builds custom hardware for tough environments, including drones, counter-drone systems, mobile labs, and sensing platforms, for defense and security forces, research teams, partner nations, humanitarian missions, and startups. It also delivers operator training through its Innovation Bootcamp.

additive manufacturingCNC Machiningdrone build and flight testelectronicslaser cuttingOperator trainingrapid prototypingSDRSystems integrationwelding

CAD BLU provides 3D printing solutions in the area of Computer Aided Design (CAD), Scanning Technologies, additive and subtractive processes (RP & CAM) of model generation from digital data, and software and materials to allow turnkey solutions. Founded in 2000 by Rich Motto, the company develops solutions through partnerships with technology manufacturers and software developers as well as in-house research and development staff.

3d Printingadditive manufacturingrepair servicesscanning technologiessoftwaresubtractive processes

Caliber Technologies is an engineering services company based in Detroit, Michigan, providing advanced engineering expertise to OEMs, Tier-1 suppliers, and start-ups to help them achieve faster time to market with safety and quality in mind. The company offers engineering design and development solutions, CAE simulations, and consulting services across automotive, robotics, and RV engineering domains.

Body engineeringCAEChassis component designComputational Fluid Dynamics (CFD)Control feature developmentengineering simulatione-Powertrain designFatigue analysisFEAIC engine designLoad generationMechatronic system developmentModal AnalysisNVH testingStructural analysisStructural simulationvehicle dynamicsVirtual calibrationVirtual validation (MIL/SIL/HIL)

Caputo and Wick Ltd is a New England based consulting firm specializing in classic civil engineering, land surveying and environmental permitting services to public agencies, non-profit organizations, the general public, developers, contractors, and other design professionals. The firm began operation in the spring of 1977 and has completed well over 3500 design projects of major size and complexity. Its in-house professionals include land surveyors, civil, structure and transportation engineers and CAD technicians.

civil engineeringEnvironmental permittingGPS surveyinggrading, drainage, and utilities designintegrity assessments and forensic studiesland surveyinglocal planning and zoning representationon-site wastewater treatment systems (OWTS)sediment and erosion control designsoil evaluation and soils suitability investigationsstructural engineeringtraffic and transportation studies and designtransportation engineeringwatershed modeling and drainage analysiswetlands and stormwater permitting

CCI Mechanical is a full-service mechanical contractor based in Salt Lake City, Utah, serving commercial and industrial clients throughout the Intermountain Region for over 60 years. It specializes in design, fabrication, installation, service, and maintenance of HVAC and mechanical systems, with in-house engineering, building automation, commissioning, and 24/7 emergency service. CCI is a subsidiary of EMCOR Group.

24/7 emergency serviceBIMbuilding automationcommissioningdesign-buildenergy managementengineeringfabricationinstallationpiping fabricationPreventive maintenancesheet metal fabricationtesting, adjusting, and balancingVDC

CEPEDA Associates, Inc. is an engineering and manufacturing company located in Louisville, KY, specializing in providing service and equipment to the U.S. Navy. It is a 100% employee-owned small business, a Department of Defense provider, and ISO 9001:2008 compliant, qualified to manufacture and test Level I/SUBSAFE equipment. For more than 40 years it has manufactured, serviced, and upgraded life support equipment and complex mechanical components for the Navy's submarine fleet.

Acoustic TestingCNC latheCNC MachiningCNC millingFEAGTAWhydrostatic pressure testingLiquid penetrant testingnondestructive testingpipe socket brazingpipe socket weldingpressure testingReverse Engineeringsheet metal fabricationSMAWwelding

Chasco Constructors is a family owned, full service commercial general contracting and construction management company based in Round Rock, Texas, serving the Central Texas area. Founded in 1979 as a 4 man shop, it now has over 300 employees and revenue over $110M. It self-performs key scopes including excavation, underground utilities and concrete, and is described as the largest volume Central Texas contractor self-performing most of its work.

BIMcommercial general contractingconcrete stamping and stainingconcrete workConstruction Managementdrone mapping and 3D modelingGPS machine controlself-perform excavationunderground utilities

Cielo Field Systems is a veteran-owned small business providing CAD, drawing, manufacturing coordination and technical project support for equipment, fabricated parts and assemblies. Services include part and assembly models, equipment and enclosure layouts, DWG/PDF drawings, fabrication details, BOMs, drawing revisions, supplier quotation inputs, drawing coordination, work instructions, inspection forms and delivery records. They also support government and prime contractor RFQ and SAM.gov solicitation work.

BOMsdrawing revisionsinspection formsmanufacturing coordinationsupplier quotation supporttechnical drawingstechnical project support

CKS Technologies, LLC is a Woman-Owned Small Business located in Huntsville, AL, founded in 2011 by CEO Cherry Sisk, PE to provide professional engineering services to government and industry. The company has multiple licensed Professional Engineers on staff and provides subject matter expertise in structural and thermal analyses, mechanical and electrical design, and systems engineering for customers including the US Army, US Navy, NASA and industry.

electrical designfailure review and analysisfinite element analysisIndependent Verification and ValidationMechanical Designproject managementRequirements Managementsafety assessmentsStructural analysisSystems Engineeringtest and evaluationthermal analysisthermal stress analysis

Command Systems, Inc. is a factory authorized service repair center and reseller for industrial equipment, located in Oakmont, Pennsylvania. It has been keeping critical tools up and running for over 40 years, with a 15,000 square foot repair and refurbishment facility housing 10 bench-repair and test workstations. Its mining repair division is Advance Mining Services.

calibrationscustom panel assemblyequipment cleaning and paintingequipment repairOEM coordinationon-site repairpreventative maintenancerefurbishmenttroubleshootingwelding equipment repair

Conic Systems, Inc. is a technology company focused on harmonic gearing and controls since 1968. It offers harmonic gearing components, harmonic differential transmissions, gearheads, and industrial controls, with manufacturing capabilities in Port Jervis, NY covering all operations to transform raw materials into completed gearheads and controls. It also provides engineered solutions and industrial control for motion control applications.

accuracy testingCAMdynamic testingengineered solutionsFEAFFTharmonic gearing manufacturingindustrial controlsmetallurgical sampling and treatingoptical and tactile measuringprototyping

Contra Costa Electric is an electrical construction firm offering total electrical construction, engineering, facilities maintenance, utility, sound and communications and renewable energy services throughout California. Headquartered in Martinez, CA, with branch offices in Bakersfield and Fresno, it serves the Industrial, Healthcare, Mixed-Use Commercial, Utility, and Renewable Energy markets with single-source electrical solutions.

BIMConstruction Managementdesign-buildelectrical constructionengineeringfacilities maintenanceinstallationstart-uptesting

of page CMT is pleased to announce new amplifier packaging designs for noisy environments. The chassis incorporates shielded SMA connectors for all DC connections, amplifier supply and input DC Bias tees.Introducing CMT's newest addition to their amplifier line, the CMT-BA0.5, a cryogenic Si Ge low noise amplifier. The CMT-BA0.5 is optimized for low frequency applications, covering the frequency range down to 500 KHz and up to 500 MHz.Follow us New Amplifier Packaging for Noisy Environments The chassis incorporates shielded SMA connectors for all DC connections, amplifier supply and input DC Bias tees.Learn More Quin Star recently posted an article about a Dewar that we at Cosmic Microwave Technology built for them. We are very happy to hear that it appears to be working out very well for them.Click Here to Read Article bottom of page

amplifier constructionamplifier testingin-house machiningmicro soldering on circuit boardsPCB DesignQAroom temperature testing

Creative Engineering LLC is a product development and design firm that helps innovators and businesses bring ideas to life from early concept through market-ready product. For nearly three decades, the team has partnered with clients across industries to tackle open-ended challenges using practical, thoughtful solutions that are robust, manufacturable, and grounded in real user needs. The firm offers concept development, CAD and prototyping, design for manufacturing, and hands-on project management.

3d Printingcasting designconcept developmentDesign for ManufacturingFMEAinjection molding designmanufacturing sourcingon-site machine shopproject managementprototypingsheet metal design