automated optical inspection

Accelerated Assemblies is an Illinois-based provider of PCB assembly and manufacturing services, serving customers across the USA. The company specializes in low-to-mid volume PCB production and prototyping, offering turnkey and consignment assembly, quick turn assemblies, and end-to-end services including engineering and design support.

BGA and Micro BGA placementbox buildsconformal coatingfunctional testingin-circuit testinglow-pressure moldingpottingSMT assemblythrough-hole assemblywire harness assemblyx-ray inspection

Altaflex was founded in 2000 to address the growing need for production-quality flex circuits at the prototype stage. Altaflex fabricates production-quality flex and rigid flex prototypes and small- to medium-production at quick-turn speeds, and is ISO 9001:2015 and ISO13485:2016 registered. In 2016 Altaflex joined the OSI Electronics family, and in early 2019 it began offering in-house assembly services.

assemblyFlying probe electrical testingimpedance testingInkjet legend printinglaser direct imagingNC drillingUV Yag laser drillingX-Ray Fluorescence measurementx-ray inspection

Altest Corporation is a Silicon Valley-based, fully integrated PCB manufacturer offering turnkey electronics manufacturing services including PCB design, fabrication, assembly, and testing. The company serves aerospace, defense, medical, and industrial customers with high-reliability PCBs, specializing in higher layer count PCBs, exotic materials, laser drill micro-vias, blind/buried vias, and via fill. It also provides component kitting, inventory management, and fulfillment services.

blind/buried viasbox buildcomponent kittingflying probe testinginventory managementlaser drill micro-viasPCB assemblyPCB designPCB fabricationselective solderingSMT placementtestingvapor phase solderingvia fillwave solderingx-ray inspection

American Circuits is an electronic contract manufacturer specializing in turnkey PCB services from design to box builds, located in Charlotte, North Carolina, where it maintains two manufacturing facilities totaling 40,000 sq ft. The company is ISO 9001 certified, ITAR registered, and U/L recognized, and does everything in-house from planning and design to final delivery.

cable assemblyconformal coatingelectro-mechanical assemblykittingmachiningmixed technology assemblyPCB assemblyPCB designpottingreverse engineeringSMT assemblytestingthrough-hole assemblywire harness assemblywire processing (straightening, cutting, stripping, crimping, terminating)

ANZER is an electronic manufacturing and supply chain service provider based in Akron, Ohio, offering PCB assembly, contract electronics manufacturing, box build assembly, wire and cable harness assembly, and custom electronic design. The company has over 33 years of experience and serves industries including aerospace, automotive, agriculture, medical, industrial automation, lighting controls, and sports.

box build assemblycontract manufacturingdesign and engineeringmixed technology assemblyPCB assemblyPCB coating and pottingpre-production buildPrototype BuildSMT assemblytesting and inspectionTHT assemblywire and cable harness assembly

Boston Semi Equipment (BSE) provides intelligent automation solutions and advanced test handlers for semiconductor device testing. BSE offers gravity, pick and place, system level test, and custom automation tools, plus thermal test solutions and test cell services, backed by a global service infrastructure for installation, warranty and post-warranty service.

active thermal controlboard repairCustom automationOEM contract servicessystem level testsystem repairtest handlingthermal test solutions

CeTaQ Americas is an independent third-party provider of measurement equipment, glass reference boards, software and service solutions for Surface Mount Technology (SMT) manufacturing. Founded in 1996 as CeTaQ GmbH in Dresden, Germany, with an active presence in the Americas since 2001, it offers machine capability analysis and validation services to optimize precision, efficiency and quality in SMT processes.

component placementdispensinglaser marking validationmachine capability analysisprinting validationReflow solderingroutingsolder paste inspectiontrainingx-y-theta measurementZ-force measurement

Dallas Quantum Devices is a self-funded boutique photonics company founded in October 2018 by Jim Tatum, Luke Graham, and Pritha Khurana. It focuses on providing unique laser and detector solutions, specializing in highly customized VCSEL and photodiode solutions, and has developed VCSEL epitaxial structures ranging from 650nm to more than 1000nm fabricated into single mode, high power, and high speed devices.

die attachflip chip mountingnear and far field measurementsphotonic design softwaresmall signal analysis to 40GHzthermo-compression bondingVCSEL designwafer level testingwafer qualification testingwire bonding

Saunders Electronics is a privately owned Electronics Manufacturing Services (EMS) provider located in Southern Maine, supporting original equipment manufacturers (OEMs) since 1979. It serves a global customer base in the military, medical, industrial controls, and other markets, providing manufacturing resource solutions from product concept to shipment. It was named Manufacturer of the Year 2018 by the Manufacturer's Association of Maine.

3D printingaqueous cleaningautomated thru-hole insertioncable and wire harness assemblyelectro-mechanical assemblyflying probe testingfunctional testinghand assemblylaser cuttingmachiningselective solderingsurface-mount assemblythrough-hole assemblyturnkey assemblywave solderingx-ray inspection

DFW Test Incorporated is a turnkey service provider for ATE test hardware and a contract electronic manufacturer, founded in 1992. Based in Richardson, Texas, the company offers PCB design, probe cards, prototype assemblies, PCB fabrication, SMT and hand assembly, and mechanical hardware/machine shop services for the semiconductor test industry.

4-axis machiningCNC machiningflying probe testfunctional testhand assemblyPCB designPCB fabricationprobe card manufacturingSMT assembly

Digital Six Laboratories (D6 Labs) develops, manufactures, and installs SCADA and automation solutions for water and wastewater applications. Every component, from controllers at customer sites to the Whisker.io cloud platform, is designed and built by D6 Labs in Oklahoma City with security as a foundation. The company designs circuits, runs its own SMT line with MyData pick-and-place and automated optical inspection, then builds, installs and supports every system.

cloud platform developmentinstallationmanufacturingSCADA and automation designSMT assemblysupport

EMCom Inc. is an electronic and electro-mechanical manufacturing company that first opened in June of 1995. With over 150 employees, it operates in a 55,000 sq. ft. manufacturing and warehouse facility with dedicated areas for printed circuit board assemblies and cabling solutions, serving industries including medical, automotive and military from prototype builds to full production runs.

cabling and harnessingencapsulation and pottinghand solderinghigh pressure moldinglow-pressure moldingPCB assembly up to 18 layersRF cable assemblyselective soldersurface mountthru-hole

Emerald Technologies is a global contract manufacturing and design firm offering high-reliability electronic manufacturing services and complete product life-cycle solutions. It serves high-reliability end markets including Aerospace & Defense, Energy & Renewables, Life Sciences, Industrial & Semiconductor, and Enterprise Communications, with facilities in the USA, China, and Malaysia.

cable harness assemblyconformal coatingdesign & engineeringdesign layoutDFM/DFTflying probe testingfunctional testingin-circuit testingovermoldingPTH assemblyselective solderingshock and vibration testingSMT assemblysystem assemblythermal cycle testing

EMS Solutions (a division of PCB Solutions Inc.) is a full service Electronic Manufacturing Service (EMS) company located near Salt Lake City, Utah. Founded in 2000 as a contract manufacturer, it provides printed circuit board assembly, cable and harness assemblies, box build assemblies, test solutions, and design collaboration for customers in RF, medical, industrial, aerospace, military, and consumer markets.

box build assemblycable and harness assemblydesign collaborationnew product introductionSMT assemblysupply chain managementtestingthrough-hole assembly