5-axis machining

Aristo-Cast, Inc. is an investment casting foundry in Almont, Michigan, specializing in metal investment casting and rapid prototyping. It is one of only seven magnesium investment casting companies in the world and offers additive-assisted investment casting including 3D scanning and in-house tooling. The company is AS9100:D and ISO 9001:2015 certified and serves industries including aerospace, automotive, medical, military, and electronics.

3D printing3D scanningadditive manufacturingcoatingheat treatingin-house toolinginvestment castingmachining

Armadillo Additive is a metal 3D printing contract manufacturer in Granbury, Texas, running three AddUp FormUp 350 laser powder bed fusion printers with twelve lasers and a DMG Mori DMU 40 Pro five-axis CNC for post-processing. The shop prints only Grade 23 titanium (Ti-6Al-4V) and 17-4 PH stainless steel, with in-house wire EDM, depowdering, argon furnace heat treatment, laser marking and ultrasonic cleaning to ASTM F86, then CMM and Keyence inspection. It is ISO 13485 certified, FDA registered, and holds an FFL and SOT.

5-axis CNC machiningCMM inspectionCT scanningdepowderingdesign for additive manufacturingdesign in nTop and SolidWorksheat treatmentlaser markinglaser powder bed fusionLattice Structuresmaterial testingmetal 3D printingoxygen analysistopology optimizationultrasonic cleaningwire EDM

Ascend Engineering is a family-owned CNC machining company founded in 2007 by Mechanical Engineer Scott Hadley and his wife Karen Hadley. It specializes in CNC milling and turning with 3, 4, and 5-axis capability, machining tight tolerance components and build-to-spec mechanical assemblies. The company holds an ISO 9001:2015 certified QMS and serves industries including Electrical, Department of Defense, Aerospace, Medical, Restaurant Equipment, and Microwave Guide Manufacturing.

3-axis machining4-axis machiningAS9102 reportingBroachingCNC millingCNC turningknurlingmetrology inspectionPPAP reportingreverse engineering

Astro Manufacturing & Design is a full-service contract manufacturer located in Eastlake, Ohio, offering turnkey contract manufacturing of systems, machines, equipment and sub-assemblies. It serves the aerospace, military, medical, commercial, technology, industrial, and automotive industries from a 142,000 square foot facility and is ISO 9001:2008 certified.

assemblyautomation engineeringboring millCNC machiningCNC millingCNC turninglaser cuttingpaintingpowder coatingrobotic weldingsheet metal fabricatingwater jet cuttingwelding

ATA Gears designs and manufactures application-specific bevel and cylindrical gears and geared power transmission components for demanding industrial applications. Based in Tampere, Finland, the company employs over 140 professionals and controls the entire manufacturing process in-house, including heat treatment. It has almost 90 years of experience and serves industries such as maritime propulsion, energy production, process industries, minerals processing, specialty vehicles, rail transportation and defense.

3D measurementgear designheat treatment (carburizing, induction hardening, nitriding)isotropic superfinishingNDT (ultrasonic and magnaflux testing)phosphatingshot peeningtooth cutting/grindingWC/C coatings

Atmosphere Machining LLC is a precision CNC machine shop making chips since 1986 in Tehachapi, California. The job shop delivers parts complete to customer specifications, including heat treat, NDT, passivation, chemical conversion and finishing coatings. In-house work covers rapid prototypes and part runs from 1 to 1,000, whole-package manufacturing through specialty suppliers, CNC programming and training, and reverse engineering, with max turning envelope 12 in x 18 in and milling envelope 20 in x 50 in x 20 in.

3D scanningCAM programmingchemical conversion coatingCNC machiningCNC millingCNC turningfinishingheat treatinglaser cuttingnon-destructive testingpart markingpassivationproduction machiningprototype machiningreverse engineeringwaterjet cuttingwelding

Welcome to Austin Machine Austin Machine specializes in the manufacture and assembly of parts for the aerospace industry. From prototypes to production parts, our specialties include short lead times, small quantities with quick turnarounds, hinges, very large parts, complex 5 axis parts and the use of 90 degree heads with 5 axis machines. Experienced machinists combined with an excellent inspection department allow us to offer you quality parts at a fair and competitive price. See More Examples of Our Work Austin Machine has a quality assurance program that is certified for the Aerospace Industry with ISO 9001: 2015 & AS9100D provisions. We are currently a Bronze Level Preferred Supplier for The Boeing Company and an Approved Supplier for the Gulfstream Aerospace Corporation. Austin Machine uses the following software: Master Cam, Solidworks, Unigraphics, Catia, and Kubotek. Our capabil

assemblyCNC Lathe / Mill-TurnCNC millingconventional machininginspectionprogram managementprogrammingtooling designwaterjet cutting

Axion Corporation is an SBA-registered Woman Owned Small Business (WOSB) and Native American Owned Enterprise located in Huntsville, Alabama, near Redstone Arsenal. Since 1984 it has been a DOD contractor providing OEM design and build to print manufacturing services for aircraft manufacturers, component OEMs, and the U.S. government. It is ISO9001:2015 certified and operates a 155,000 SQFT factory built in 2014, employing on average 15-25 people.

assemblybuild-to-printcustom engineering designfinal assemblymachiningplating and paintingpunch and formingrobotic weldingwelding

Azoth is a production-focused additive manufacturing company that produces small, complex, end-use metal and polymer components for high-performance applications across automotive, medical, defense, consumer electronics, and industrial markets. It offers metal binder jetting, lithography metal manufacturing, polymer printing, 5-axis CNC machining, and finishing under one roof, backed by ISO 9001:2015 and ISO 13485:2016 certified quality systems.

binder jettingCerakote/powder coatCNC machiningFDMfinishingheat treatmentHP Multi Jet Fusionlithography metal manufacturingMIMsinteringSLA/DLPSLS

Bandy Manufacturing, located in Burbank, California, is a supplier of standard and custom hinges to the aerospace industry. Founded by Gerry W. Bandy in 1953, the company produces over 100,000 hinges per year and supports military and commercial aircraft and aerospace vehicles as well as non-aerospace applications. In December 2024, Bandy Manufacturing was acquired by Novaria Group.

assemblyCNC millingcustom hinge drillingcutting to lengthdesign for manufacturability feedbackengineering verificationkittingmarkingmaterial selectionpackagingprototypingslotting

Bauman Machine Inc. is a precision machine shop located in Oklahoma City, OK, established in 1973. It began as a small company providing welding, turning and threading services to the oilfield and today is a mid-size full-service machine shop specializing in turning, milling and multi-axis machining for industries including aerospace, energy, medical, industrial and defense.

API ThreadingCAD/CAMCNC millingCNC turningCoordinate Measuring Machinelaser engravingM.I.G. weldingmill/turn machiningNC Dual Column Sawingroboticsstick weldingtig welding

B&B Airparts is a full-capability aerospace manufacturer founded in April 1998 in Wichita, Kansas. Operating more than 50 CNC machines across a 94,000+ square foot facility, it performs machining, sheet metal fabrication, forming, and complex major assembly as a single-source supplier. On January 5, 2026, B&B Airparts was acquired by Spartan Aerospace Group.

3-axis machining4-axis machiningCNC machiningCNC millinghydroformingpress brake formingsheet metal fabricationwater jet cutting

Beacon Industries is a privately owned machine shop in the Dallas/Fort Worth Metroplex, established in 1976, that manufactures complex, close-tolerance structural parts and assemblies for military and commercial aircraft. It operates from a 100,000 sq/ft climate-controlled facility and runs 3-, 4- and 5-axis machines, including gantry mills capable of parts over 80 feet long. Its quality system is approved to ISO 9001:2015 and AS9100 Rev. D.

3-axis machining4-axis machiningCNC machiningFirst article inspectionfull-rate productiongantry millingin-house program developmentlarge envelope machining

Bedard Machine Inc. is a family-owned precision CNC machining shop founded in 1979 in Brea, California. It specializes in multi-axis CNC milling and turning of complex, tight-tolerance components to ±0.0001" for aerospace, defense, and industrial customers, with AS9100D and ISO 9001 certification and ITAR registration.

CMM inspectionCNC millingCNC turninglive toolingMasterCAM programmingmill-turn machiningPC-DMIStight-tolerance machining to ±0.0001"twin-spindle turning

Best Machine Inc. is a precision CNC machining company based in Fremont, New Hampshire. It specializes in CNC milling, CNC turning, Swiss machining, and EDM for instrumentation, medical device, and industrial manufacturers. The company is ISO 9001:2015 certified and serves customers across New England.

CMM inspectionCNC horizontal millingCNC millingCNC turningCNC vertical millingEDM hole drillingFirst article inspectionlaser markingmill turningSwiss turningtube bendingwire EDM

Welcome to Betts Precision Your Reliable Machining Partner Betts Precision delivers complex precision CNC machining and high-tolerance components for leading orthopedic, aerospace, and industrial OEMs. Our commitment to innovation, quality, and Design for Manufacturability (DFM) helps customers move seamlessly from prototype to production with greater speed, efficiency, and confidence. From advanced multi-axis machining, grinding, and EDM to final inspection and clean-room ready delivery, we provide reliable manufacturing solutions built around our customers’ most demanding applications. As your trusted machining partner, we focus on precision, performance, and long-term partnership. Capabilities Precision Grinding CNC Turning CNC Milling Gun Drilling Custom/Specials Secondary Operations Design for Manufacturing Bett’s Precision’s unparalleled engineering team is unique to the industry.

5-axis grindingassemblyClean-room ready deliveryCNC millingCNC turningdesign for manufacturing (DFM)EDMEpoxy ink markingfinal inspectionGun DrillingLaser and TIG weldinglaser markingNitric and citric passivationpackagingprecision grindingultrasonic cleaning

Blackhawk Engineering, LLC is a contract precision CNC machining facility founded in 1974 in Cedar Falls, Iowa. Originally building tooling, dies, and special machines, it has grown over 50 years to focus on large and complex drivetrain-type parts made primarily from iron castings for heavy equipment, agriculture, construction, mining, and government settings. It is ITAR Registered and ISO 9001:2015 Certified.

automationboringCNC machiningcontract manufacturingdrillingmaterial selection and procurementmillingprototype and production designturning

Blossom Aerospace is a manufacturer of precision 3, 4, and 5-Axis machined parts from a wide array of materials and sizes, supporting multiple commercial and defense aerospace programs. The company manufactures approximately 700 part configurations to customer specifications from customer furnished CAD models or drawings, ranging from simple 3-Axis aluminum to complex 5-Axis titanium parts, including close tolerance holes machined from plate, bar, billets, forgings, castings, and extrusion.

3-axis machining4-axis machiningclose tolerance hole machiningkittinglight assembly

BMT Aerospace is an end-to-end partner for high-precision gears, gearboxes, transmissions and actuators for the global aerospace market, with in-house technologies and specialised services covering every step of a project from design and raw material to aftersales. The company has been making gears for more than 60 years and serves major aircraft and helicopter manufacturers.

CNC machiningDesign & Engineeringdie quenchingfinite elements calculationgear hobbing and grindinggrindingheat treatmentmanganese phosphate coatingmillingprecision machiningSpline BroachingturningVacuum heat treatment

Bob Lewis Machine Company is a precision machining and assembly manufacturer in Gardena, California, serving the commercial and aerospace industries since 1975. It operates 14 CNC machining and turning centers with full 5-axis and 6-axis contouring capabilities, and is certified to AS9100D and ISO 9001:2015.

6-axis machiningassemblyCAD/CAM programmingCNC machiningCNC turninggrindingwire EDM

Broadwind is a diversified manufacturer supporting leading OEMs in critical industries through three divisions. It provides heavy fabrication, industrial gearing and gearboxes (by Brad Foote Gearing), heat treatment, procurement and supply chain, kitting and assembly, material handling, and design for manufacturing services. The company serves markets including power generation, mining, renewable energy, oil & gas, heavy construction, infrastructure, defense, steel, marine, and paper & pulp.

assemblycarburizingCNC grindingelectromechanical assemblyfabricationGear Cuttingheat treatingindustrial coating and paintingkittingnon-destructive testingreverse engineeringshot peeningwelding

Brogdon Machine manufactures precision machine parts and sub-assemblies primarily for the aerospace and medical industries, working with both hard metals and aluminum. It also produces tooling such as forming tools, assembly fixtures, master models, and trim & drill tools, and uses a 7-axis CNC grinder to make special design end mills and drills and to perform precision re-grinding.

CNC grindingCNC machininghard-metal machiningintegrated supply chain

Brownstown Quality Tool & Automation is a privately owned company with extensive experience in the design and construction of custom tooling and automated equipment. Established in 1974 by Bob Nehrt, the company builds machines from SolidWorks 3D CAD models through machine build, test and run-off, and runs a machine shop with a multi-axis CNC machining center, CNC lathes and gauges for automotive customers.

25 years of industry experienceCNC lathedesignDesign and engineering with SolidWorks 3D CAD modeling, 3D assembly and detailed drawingsHurco TM10i CNC Lathemachine buildsmachiningMatsuura MX330 PC10 5 Axis machining centerprecision engineeringPrecision engineering, machine build, test and run-offSolidWorks 3D CAD modelingtest and run-off

BT Machine is a full-service Tulsa, Oklahoma shop handling precision CNC machining, welding and fabrication, and powder coating in-house so costs stay predictable and timelines stay on track. Since 1992 the company has delivered precision parts and turnkey assemblies for aerospace, energy, defense, flight simulation, and industrial work, operating from a 32,000 sq. ft. facility with 30+ team members and offering expedited turnaround on urgent projects.

3D printingassemblyCMM inspectionCNC machiningCNC millingCNC turningdesign and modelingfabricationhydro testingin-house programmingM.I.G. weldingpowder coatingprototype and production machiningQuality management systemsandblastingsource inspectionstick weldingtig weldingwelding